How to Choose the Best Welder Training Program near Piedmont South Carolina
Choosing the ideal welding school near Piedmont SC is an important first step to starting your new occupation as a professional welder. But since there are a lot of schools to choose from, how do you know which ones to consider? And more significantly, once you have fine tuned your options, how do you pick the right one? A number of people start by reviewing the schools that are closest to their residences. When they have found those that are within driving distance, they are drawn toward the cheapest one. Yes, location and the cost of tuition are necessary concerns when examining welder technical schools, but they are not the only ones. Other considerations include such things as accreditation, reputation and job placement rates. So before beginning your search for a trade school to become a welder, it’s sensible to establish a list of qualifications that your selected school must have. But before we delve into our due diligence checklist, let’s cover a little bit about how to become a welder.
Request Free Information on Welding Schools Near You
Welding Certificate and Degree Training Courses
There are multiple options available to get training as a welder in a technical or trade school. You can receive a a certificate, a diploma or an Associate Degree. Bachelor Degrees are offered in Welding Engineering or Welding Technology, but are more advanced programs than most journeyman welders will need. Some programs are also made available combined with an apprenticeship program. Following are short explanations of the most prevalent welding programs offered in the Piedmont SC area.
- Certificate and Diploma Programs are usually offered by trade and technical schools and require about 1 year to complete. They are more hands-on training in scope, designed largely to develop welding skills. They can furnish a good foundation for a new journeyman or apprentice welder, or additional skills for working welders.
- Associate Degree Programs will take two years to finish and are most often offered by community colleges. An Associate Degree in Welding Technology provides a more extensive education than the diploma or certificate while still furnishing the foundation that prepares students to enter the workforce.
A number of states and municipalities do have licensing requirements for welders, so make sure to find out for your location of potential employment. If needed, the welding school you pick should prep you for any licensing examinations that you will need to pass in addition to supplying the suitable training to become a professional welder.
Click Here to Get Free Information on Welding Schools Near You!
Welder Certification Choices
There are a number of institutions that provide welding certifications, which assess the knowledge and skill level of those applying. Many Piedmont SC employers not only require a certificate or degree from an accredited welding program, but also certification from a renowned organization such as the American Welding Society (AWS). Different certifications are available based upon the kind of work that the welder does. Just some of the skills that certification can acknowledge are the welder’s ability to
- Work in compliance with specific codes
- Work with specific metal thicknesses
- Work with specific kinds of welds
- Work based on contract specifications
As already mentioned, some states, cities or local municipalities have licensing mandates for welders. Of those requiring licensing, many additionally require certification for various types of work. Certification is also a way to demonstrate to employers that you are an extremely skilled and qualified welder. So just as with licensing, check the requirements for your local area and verify that the welder tech school you decide on prepares you for certification as needed.
Subjects to Ask Welding Trade Schools
As soon as you have chosen the credential you want to obtain, a certificate, diploma or degree, you can start to evaluate schools. As you are no doubt aware, there are numerous welding vocational and trade schools in the Piedmont SC area. That’s why it’s important to establish up front what qualifications your chosen school must have. We have previously discussed two significant ones that many people look at first, which are location and tuition cost. As mentioned, although they are essential qualifiers, they are not the only ones that need to be considered. After all, the school you select is going to provide the training that will be the foundation of your new vocation as a welder. So below are some additional factors you might want to consider before picking a welding vocational school.
Accreditation. It’s very important that the welding vocational school you choose is accredited by either a regional or a national agency. There are 2 basic types of accreditation. The school may attain Institutional Accreditation based on all of their programs. Programmatic Accreditation is based on an individual program the school offers, for instance Welding Technology. So make certain that the program you select is accredited, not just the school alone. Also, the accreditation should be by a U.S. Department of Education acknowledged accrediting agency, like the Accrediting Commission of Career Schools and Colleges of Technology (ACCSCT). Besides helping make sure that you get an excellent education, the accreditation can also assist in acquiring financial aid or student loans, which are in many cases unavailable in Piedmont SC for non-accredited schools. Also, for those states or municipalities that mandate licensing, they may require that the welding training program be accredited also.
Job Assistance and Apprenticeship Programs. Numerous welder degree or certificate programs are offered in conjunction with an apprenticeship program. Some other schools will assist in placing you in an apprenticeship or a job upon graduation. Find out if the schools you are looking at help in placing students in apprenticeships or have a job placement program. The schools should have associations with local unions and various metal working businesses to which they can place their students. Older schools may have a larger network of graduates that they can rely upon for referrals. These programs can help students find employment and establish relationships within the Piedmont SC welding community.
Completion and Job Placement Rates. The completion rate is the percentage of students that start an instructional program and finish it. It’s important that the welder school you choose has a higher completion rate. A low rate may indicate that the students who were in the program were unhappy with the instruction, the instructors, or the facilities, and dropped out. The job placement rate is also a good indicator of the quality of training. A high job placement rate will not only verify that the school has a good reputation within the field, but also that it has the network of Piedmont SC employer relationships to help students secure apprenticeships or employment upon graduation.
Up-to-date Facilities and Equipment. After you have narrowed down your selection of welding programs to two or three possibilities, you should consider going to the campuses to look over their facilities. Verify that both the facilities and the equipment that you will be instructed on are up-to-date. In particular, the training equipment should be comparable to what you will be using on the job. If you are unsure what to look for, and are already in an apprenticeship program, consult with the master welder you are working under for guidance. If not, ask a local Piedmont SC welding contractor if they can give you some suggestions.
School Location. Even though we already briefly covered the importance of location, there are a few additional points that we need to address. You should bear in mind that unless you are able to move, the welding school you select must be within driving distance of your Piedmont SC home. If you do opt to enroll in an out-of-state school, in addition to moving costs there may be higher tuition fees for out-of-state residents. This is especially true for welder diploma programs offered by community colleges. Furthermore, if the school provides a job placement or apprenticeship program, often their placements are within the school’s local community. So the location of the school should be in a region or state where you ultimately will want to work.
Small Classes. Personalized training is essential for a manual trade such as welding. It’s easy to get overlooked in bigger classes and not get much individualized instruction. Find out what the typical class size is for the welder programs you are looking at. Inquire if you can attend a few classes so that you can experience how much individual attention the students are receiving. While there, talk with some of the students and get their evaluations. Similarly, chat with a couple of the teachers and ask what their welding experience has been and what certifications and credentials they have earned.
Convenient Class Schedules. Many people learn a new trade while still employed at their current job. Make sure that the class schedules for the programs you are reviewing are convenient enough to satisfy your needs. If you can only go to classes in the evenings or on weekends near Piedmont SC, make certain that the schools you are reviewing provide those choices. If you can only attend part-time, make sure that the school you choose offers part-time enrollment. Also, ask what the policy is to make up classes should you miss any due to work, sickness or family emergencies.
Online Welder Certificate and Degree Programs
Welding is very much a manual type of vocation, and therefore not extremely suitable for training online. Even so, there are a few online welding programs offered by specific community colleges and vocational schools in the greater Piedmont SC area that may count toward a degree or certificate program. These classes mainly deal with such topics as safety, reading blueprints, and metallurgy. They can help give a beginner a foundation to start their training and education. Nevertheless, the most important point is that you can’t learn how to weld or handle welding materials until you actually do it. Clearly that can’t be performed online. These skills need to be learned in an on-campus environment or in an apprenticeship. Online or distance learning is better suited for experienced welders that desire to advance their expertise or perhaps obtain a more advanced degree. So if you should discover an online welding degree or certificate program, be extremely cautious and verify that the bulk of the training is done on campus or in a workshop type of setting.
Where to Find Online Schools for Welders Near Me Piedmont SC
Choosing the best welding training program will probably be the most critical decision you will make to launch your new career. You originally stopped by our website because you had an interest in Where to Find Online Schools for Welders Near Me and wanted more information on the topic Where to Find Part Time Schools for Welders Near Me. However, as we have addressed in this article, there are many factors that you will need to assess and compare among the schools you are looking at. It’s a necessity that any welding training program that you are assessing includes a good deal of hands-on training. Classes should be small in size and every student must have their personal welding machine to train on. Classroom teaching needs to provide a real-world context, and the training program should be up-to-date and in-line with industry standards. Programs vary in length and the kind of credential offered, so you will need to ascertain what length of program and certificate or degree will best satisfy your needs. Every training program offers different options for certification as well. Probably The ideal way to research your short list of schools is to go to each campus and talk with the students and instructors. Invest some time to monitor a few classes. Tour the campus and facilities. Make sure that you are confident that the program you choose is the right one for you. With the right training, effort and commitment, the end result will be a new trade as a professional welder in Piedmont SC.
Other South Carolina Welder Locations
Piedmont, South Carolina
Native Americans and early settlers of Piedmont called the area "Big Shoals of the Saluda" after the Saluda River. The Native Americans used the shoals as a crossing. David Garrison established a grist mill around 1850 upon the shoals changing the name of the area to Garrison Shoals. Henry Pinckney Hammett bought this property for his cotton mill that used water power of the shoals. The name of the area changed again to Piedmont, "Foot of the Mountains" and became a mill town. The American Civil War disrupted Hammett's project until 1876 when his plant began operations. Piedmont was added to Hammett's charter for Piedmont Manufacturing Company and a railroad station. Water power from the Saluda River was also used to produce electricity to run the machinery from the 1880s to the 1920s. The machinery of the Piedmont Manufacturing Company was from Saco Lowell and Whitin Machine Works that helped finance Hammett's company.[4] In 1946 the mills were sold to J.P. Stevens and Company where it then was updated with modern features. Manufacturing continued until 1977 and in 1983 most of Piedmont Manufacturing Company burned down.[5]
Piedmont is located in northern Anderson County and southwestern Greenville County at 34°42′15″N 82°27′41″W / 34.70417°N 82.46139°W / 34.70417; -82.46139 (34.704140, -82.461427).[6] It is 12 miles (19 km) south of the center of Greenville. Exit 35 on Interstate 85 is 2 miles (3 km) to the west of the center of Piedmont. South Carolina state road 86 cuts through the small town also, connecting with Interstate 85 at Exit 35. According to the United States Census Bureau, the CDP has a total area of 8.8 square miles (22.7 km2), of which 8.6 square miles (22.3 km2) is land and 0.15 square miles (0.4 km2), or 1.93%, is water.[3] The Saluda River flows southwards over a dam through the center of town.
As of the census[1] of 2000, there were 4,684 people, 1,829 households, and 1,349 families residing in the CDP. The population density was 545.6 people per square mile (210.8/km²). There were 1,992 housing units at an average density of 232.0 per square mile (89.6/km²). The racial makeup of the CDP was 92.08% White, 5.85% African American, 0.19% Native American, 0.23% Asian, 0.02% Pacific Islander, 0.11% from other races, and 1.52% from two or more races. Hispanic or Latino of any race were 1.20% of the population.
Business Results 1 - 10 of 1
1 Reviews 