How to Select the Best Welder Training Program near Kersey Colorado
Selecting the right welding technical school near Kersey CO is an essential first step to launching your new occupation as a professional welder. But since there are numerous schools to choose from, how do you determine which ones to consider? And more notably, once you have narrowed down your alternatives, how do you select the best one? Most people begin by looking at the schools that are nearest to their homes. Once they have located those that are within driving distance, they are drawn toward the cheapest one. Yes, location and the cost of tuition are important issues when examining welder trade schools, but they are not the only ones. Other concerns include such things as reputation, accreditation and job placement rates. So before beginning your search for a trade school to become a welder, it’s prudent to create a list of qualifications that your selected school must have. But before we explore our due diligence checklist, let’s cover a little bit about how to become a welder.
Request Free Information on Welding Schools Near You
Welder Certificate and Degree Training
There are a number of options available to receive training as a welder in a trade or technical school. You can receive a a certificate, a diploma or an Associate Degree. Bachelor Degrees are offered in Welding Engineering or Welding Technology, but are more advanced courses than most journeyman welders will need. Some programs are also made available combined with an apprenticeship program. Below are short explanations of the most prevalent welding programs available in the Kersey CO area.
- Certificate and Diploma Programs are generally made available by trade and technical schools and take about 1 year to finish. They are more hands-on training in nature, designed primarily to develop welding skills. They can provide a good foundation for a new journeyman or apprentice welder, or specialized skills for experienced welders.
- Associate Degree Programs will take 2 years to complete and are most often offered by community colleges. An Associate Degree in Welding Technology offers a more extensive education than the diploma or certificate while still providing the foundation that prepares students to enter the workforce.
Some municipalities and states do have licensing requirements for welders, therefore be sure to check for your location of potential employment. As required, the welding school you choose should prepare you for any licensing examinations that you will need to take in addition to furnishing the proper training to become a professional welder.
Welder Certification Options
There are various organizations that offer welder certifications, which test the knowledge and skill level of those applying. Numerous Kersey CO employers not only demand a certificate or degree from an accredited welding program, but also certification from a respected organization such as the American Welding Society (AWS). A wide range of certifications are offered based on the kind of work that the welder does. Just some of the things that certification can acknowledge are the welder’s ability to
- Operate in compliance with specific codes
- Work with specific metal thicknesses
- Work with certain types of welds
- Perform based on contract specifications
As previously mentioned, some cities, states or local municipalities have licensing mandates for welders. Of those calling for licensing, a number additionally require certification for different kinds of work. Certification is also a means to demonstrate to employers that you are an exceptionally skilled and knowledgeable welder. So just as with licensing, look into the requirements for your local area and confirm that the welder technical school you choose prepares you for certification if needed.
What to Ask Welding Tech Schools
Once you have chosen the credential you would like to obtain, a diploma, certificate or degree, you can start to assess schools. As you can imagine, there are a large number of welder vocational and trade schools in the Kersey CO area. That’s why it’s essential to determine in advance what qualifications your selected school must have. We have previously covered two significant ones that most people look at first, which are location and tuition cost. As mentioned, although they are essential qualifiers, they are not the only ones that need to be considered. After all, the program you decide on is going to furnish the instruction that will be the foundation of your new career as a welder. So below are some additional factors you might need to consider before picking a welding technical school.
Accreditation. It’s very important that the welding vocational school you decide on is accredited by either a regional or a national organization. There are two standard kinds of accreditation. The school may earn Institutional Accreditation based on all of their programs. Programmatic Accreditation is based on a specific program the school has, such as Welding Technology. So make sure that the program you select is accredited, not just the school alone. Additionally, the accreditation should be by a U.S. Department of Education acknowledged accrediting organization, for example the Accrediting Commission of Career Schools and Colleges of Technology (ACCSCT). In addition to helping ensure that you receive an excellent education, the accreditation may also help in getting financial aid or student loans, which are frequently unavailable in Kersey CO for non-accredited schools. Also, for those states or municipalities that require licensing, they may require that the welder training program be accredited also.
Apprenticeship and Job Assistance Programs. A large number of welder degree or diploma programs are offered combined with an apprenticeship program. Other schools will assist in placing you in a job or an apprenticeship upon graduation. Ask if the schools you are looking at help in placing students in apprenticeships or have a job placement program. These schools must have relationships with local unions and various metal working businesses to which they can place their students. Older schools may have a larger network of graduates that they can rely upon for placements. These programs can help students find employment and develop relationships within the Kersey CO welding community.
Job Placement and Completion Rates. The completion rate is the portion or percentage of students that enroll in an educational program and complete it. It’s essential that the welder program you pick has a higher completion rate. A reduced rate might mean that the students who were in the program were unhappy with the training, the instructors, or the facilities, and dropped out. The job placement rate is also an indication of the quality of training. A high job placement rate will not only confirm that the school has a good reputation within the trade, but also that it has the network of Kersey CO employer relationships to help students obtain employment or apprenticeships upon graduation.
Modern Facilities and Equipment. After you have limited your selection of welder programs to 2 or 3 options, you should consider going to the campuses to look over their facilities. Verify that both the facilities and the equipment that you will be instructed on are modern. Specifically, the training equipment should be comparable to what you will be using in the field. If you are not sure what to look for, and are already in an apprenticeship program, consult with the master welder you are working under for guidance. If not, ask a local Kersey CO welding professional if they can give you a few pointers.
School Location. Even though we already briefly covered the importance of location, there are a couple of additional points that we should cover. You should keep in mind that unless you can move, the welding school you choose must be within commuting distance of your Kersey CO home. If you do opt to attend an out-of-state school, in addition to moving costs there might be higher tuition fees for out-of-state residents. This is particularly true for welding certificate programs offered by community colleges. Also, if the school offers a job placement or apprenticeship program, often their placements are within the school’s regional community. So the location of the school should be in a region or state where you ultimately will desire to work.
Small Classes. One-on-one instruction is essential for a manual trade such as welding. It’s possible to be lost in bigger classes and not get much one-on-one instruction. Find out what the average class size is for the welder schools you are looking at. Ask if you can sit in on a couple of classes so that you can witness just how much individual attention the students are getting. While there, speak with several of the students and get their opinions. Similarly, speak with a few of the instructors and find out what their welding experience has been and what credentials and certifications they have earned.
Flexible Class Scheduling. Many people learn a new profession while still working at their present job. Make sure that the class schedules for the programs you are reviewing are flexible enough to satisfy your needs. If you can only attend classes in the evenings or on weekends near Kersey CO, confirm that the schools you are considering offer those alternatives. If you can only attend part-time, verify that the school you decide on offers part-time enrollment. Also, check to see what the protocol is to make up classes should you miss any due to illness, work or family emergencies.
Online Welder Courses
Welding is truly a manual kind of trade, and therefore not extremely compatible with training online. Having said that, there are a small number of online welding courses offered by certain community colleges and technical schools in the greater Kersey CO area that may count toward a degree or certificate program. These courses mainly deal with such topics as reading blueprints, safety,, and metallurgy. They can help provide a beginner a basis to start their education and training. Nevertheless, the most significant point is that you can’t learn how to weld or handle welding materials unless you actually do it. Naturally that can’t be done online. These skills have to be learned in an on-campus setting or in an apprenticeship. Online or distance learning is better suited for experienced welders that want to advance their expertise or perhaps earn a more advanced degree. So if you should come across an online welding degree or certificate program, be extremely careful and confirm that the larger part of the training is done on campus or in a workshop type of environment.
Guide to Accredited Welding Programs Near Me Kersey CO
Picking the ideal welder school will probably be the most critical decision you will make to begin your new profession. You originally stopped by our website because you had an interest in Guide to Accredited Welding Programs Near Me and wanted more information on the topic Guide to Weekend Welding Programs Near Me. However, as we have covered in this article, there are a number of things that you will need to examine and compare among the schools you are reviewing. It’s a prerequisite that any welder training program that you are evaluating includes a good deal of hands-on training. Classes need to be small in size and every student must have their own welding machine to train on. Classroom teaching needs to provide a real-world context, and the course of study should be current and conform with industry standards. Training programs differ in duration and the type of credential offered, so you will have to decide what length of program and credential will best satisfy your needs. Each training program provides unique options for certification also. Probably the best approach to research your short list of schools is to check out each campus and talk with the faculty and students. Take the time to attend some classes. Inspect the campus and facilities. Make certain that you are confident that the training program you decide on is the right one for you. With the right training, effort and dedication, the end result will be a new trade as a professional welder in Kersey CO.
Other Colorado Welder Locations
Elbridge Gerry established a trading post called Fort Gerry on the South Platte River near the present-day town of Kersey, Colorado in the 1830s. He had two Native American wives who helped him run the post. In 1840, Gerry abandoned the site and built a post on the south bank of the river. Gerry is said to be the first white man to settle in what is now Weld County.
As of the census of 2000, there were 1,389 people, 474 households, and 374 families residing in the town. The population density was 1,425.8 people per square mile (552.9/km²). There were 489 housing units at an average density of 502.0 per square mile (194.6/km²). The racial makeup of the town was 91.43% White, 0.07% African American, 0.29% Native American, 0.79% Asian, 4.75% from other races, and 2.66% from two or more races. Hispanic or Latino of any race were 20.01% of the population.
There were 474 households out of which 48.1% had children under the age of 18 living with them, 62.4% were married couples living together, 12.2% had a female householder with no husband present, and 20.9% were non-families. 17.1% of all households were made up of individuals and 7.8% had someone living alone who was 65 years of age or older. The average household size was 2.93 and the average family size was 3.33.
Business Results 1 - 10 of 5