Locating the right welding trade school near Southfield MI is an essential first step to starting your new career as a professional welder. But since there are a lot of schools to pick from, how do you know which ones to consider? And more notably, once you have narrowed down your choices, how do you pick the best one? Most prospective students start by looking at the schools that are closest to their homes. Once they have identified those that are within driving distance, they are drawn toward the least expensive one. Yes, location and tuition cost are important considerations when reviewing welding trade schools, but they are not the only ones. Other concerns include such things as reputation, accreditation and job placement rates. So before starting your search for a vocational school to become a welder, it’s wise to create a list of qualifications that your chosen school must have. But before we explore our due diligence checklist, let’s talk a little bit about how to become a welder.

Request Free Information on Welding Schools Near You

[campusexplorer header_text=”Find Welding Schools Near You!” aos=”53237562″ concentration=”025A8616″ tracking=”WELDER-5″]

Welder Degree and Certificate Training

There are a number of alternatives available to get training as a welder in a trade or vocational school. You can receive a diploma, a certificate or an Associate Degree. Bachelor Degrees are available in Welding Technology or Welding Engineering, but are more advanced programs than most journeyman welders will need. Some programs are also made available along with an apprenticeship program. Below are short explanations of the most common welding programs available in the Southfield MI area.

• Certificate and Diploma Programs are normally offered by technical and trade schools and take about one year to finish. They are more hands-on training in nature, created largely to develop welding skills. They can furnish a good foundation for a new journeyman or apprentice welder, or supplemental skills for experienced welders.
• Associate Degree Programs will take two years to finish and are usually offered by community colleges. An Associate Degree in Welding Technology furnishes a more well-rounded education than the certificate or diploma while still supplying the foundation that prepares students to enter the workforce.

Some municipalities and states do have licensing prerequisites for welders, so make sure to find out for your location of future employment. If required, the welder school you select should prep you for any licensing exams that you will have to pass in addition to supplying the proper training to become a qualified welder.

[campusexplorer header_text=”Find Welding Schools Near You!” aos=”53237562″ concentration=”025A8616″ is_lightbox=”1″ lightbox_btn_text=”Click Here to Get Free Information on Welding Schools Near You!” tracking=”WELDER-5LB”]

Welder Certification Choices

There are various institutions that provide welder certifications, which test the skill level and knowledge of those applying. Many Southfield MI employers not only expect a certificate or degree from an accredited welding school, but also certification from a respected organization like the American Welding Society (AWS). A variety of certifications are available dependent on the kind of work that the welder does. Some of the skills that certification can attest to are the welder’s ability to

• Operate in compliance with specific codes
• Work with certain metal thicknesses
• Work with specific types of welds
• Operate in compliance with contract specifications

As formerly mentioned, many cities, states or local municipalities have licensing requirements for welders. Of those requiring licensing, a number additionally require certification for various kinds of work. Certification is also a means to prove to employers that you are an exceptionally skilled and knowledgeable welder. So similarly as with licensing, look into the requirements for your local area and verify that the welding technical school you select prepares you for certification if needed.

Points to Ask Welding Tech Schools

When you have chosen the credential you would like to attain, a degree, certificate or diploma, you can start to evaluate schools. As you are no doubt aware, there are many welding vocational and trade schools in the Southfield MI area. That’s why it’s important to establish in advance what qualifications your chosen school must have. We have already covered a couple of important ones that most people consider first, which are location and tuition cost. As mentioned, although they are essential qualifiers, they are not the only ones that must be looked at. After all, the school you pick is going to provide the instruction that will be the foundation of your new profession as a welder. So below are more factors you might want to evaluate before choosing a welding vocational school.

Accreditation. It’s essential that the welder technical school you select is accredited by either a national or a regional organization. There are 2 basic types of accreditation. The school may receive Institutional Accreditation based on all of their programs. Programmatic Accreditation is based on a single program the school has, for example Welding Technology. So verify that the program you pick is accredited, not just the school alone. Additionally, the accreditation should be by a U.S. Department of Education recognized accrediting agency, like the Accrediting Commission of Career Schools and Colleges of Technology (ACCSCT). In addition to helping make sure that you obtain a quality education, the accreditation may also assist in getting financial aid or student loans, which are in many cases unavailable in Southfield MI for schools that are not accredited. Finally, for those states or local governments that mandate licensing, they may require that the welding training program be accredited as well.

Apprenticeship and Job Assistance Programs. A large number of welding degree or certificate programs are offered combined with an apprenticeship program. Other schools will assist in placing you in a job or an apprenticeship upon graduation. Find out if the schools you are looking at help in placing students in apprenticeships or have a job assistance program. These schools should have partnerships with local unions and various metal working businesses to which they can place their students. More established schools may have a more substantial network of graduates that they can utilize for referrals. These programs can help students find employment and establish relationships within the Southfield MI welding community.

Completion and Job Placement Rates. The completion rate is the portion or percentage of students that begin an academic program and finish it. It’s important that the welder school you pick has a high completion rate. A reduced rate could mean that the students who were in the program were unhappy with the training, the teachers, or the facilities, and dropped out. The job placement rate is also an indication of the quality of training. A higher job placement rate will not only affirm that the program has an excellent reputation within the industry, but also that it has the network of Southfield MI employer relationships to help students obtain employment or apprenticeships after graduation.

Up-to-date Equipment and Facilities. Once you have limited your choice of welder programs to two or three options, you should think out going to the campuses to inspect their facilities. Verify that both the facilities and the equipment that you will be instructed on are up-to-date. Specifically, the training equipment should be comparable to what you will be using on the job. If you are not sure what to look for, and are currently in an apprenticeship program, consult with the master welder you are working under for guidance. If not, ask a local Southfield MI welding contractor if they can give you a few suggestions.

School Location. Although we previously briefly covered the importance of location, there are a couple of additional issues that we need to cover. You should remember that unless you have the ability to move, the welder school you select needs to be within commuting distance of your Southfield MI home. If you do opt to enroll in an out-of-state school, apart from relocation expenses there could be higher tuition fees for out-of-state residents. This is particularly the case for welder certificate programs offered by community colleges. Furthermore, if the school provides an apprenticeship or job placement program, most likely their placements are within the school’s regional community. So the location of the school should be in an area or state where you subsequently will wish to work.

Small Classes. Individualized training is essential for a manual trade such as welding. It’s easy to be lost in bigger classes and not get much one-on-one training. Ask what the usual class size is for the welding schools you are reviewing. Inquire if you can attend a couple of classes so that you can witness just how much individual attention the students are receiving. While there, talk with some of the students and get their feedback. Also, speak with some of the trainers and ask what their welding experience has been and what credentials and certifications they hold.

Flexible Class Scheduling. Some people learn a new trade while still employed at their present job. Make sure that the class schedules for the schools you are considering are convenient enough to meet your needs. If you can only attend classes in the evenings or on weekends near Southfield MI, confirm that the schools you are looking at provide those choices. If you can only enroll part-time, verify that the school you select offers part-time enrollment. Also, check to see what the protocol is to make up classes should you miss any due to illness, work or family circumstances.

Online Welder Degree and Certificate Programs

Welding is very much a manual type of profession, and for that reason not very compatible with training online. Having said that, there are a few online welding programs offered by specific community colleges and technical schools in the greater Southfield MI area that can count toward a degree or certificate program. These classes mainly deal with such subjects as safety, reading blueprints, and metallurgy. They can help give a novice a foundation to start their education and training. Nevertheless, the most critical point is that you can’t learn how to weld or handle welding materials until you actually do it. Obviously that can’t be accomplished online. These skills need to be learned in an on-campus setting or in an apprenticeship. Online or distance learning is better suited for seasoned welders that desire to advance their knowledge or possibly obtain a more advanced degree. So if you should come across an online welding degree or certificate program, be extremely careful and confirm that the greater part of the training is done on campus or in a workshop type of environment.

Free Info on Part Time Welding Trade Schools Southfield MI

Choosing the right welding training program will probably be the most critical decision you will make to launch your new profession. You originally stopped by our website because you had an interest in Free Info on Part Time Welding Trade Schools and wanted more information on the topic Affordable Accelerated Welding Trade Schools. However, as we have addressed in this article, there are a number of things that you will need to evaluate and compare between the programs you are looking at. It’s a must that any welding training that you are reviewing includes a good deal of hands-on training. Classes need to be smaller in size and every student must have their own welding machine to train with. Classroom teaching should offer a real-world perspective, and the curriculum should be up-to-date and conform with industry standards. Training programs vary in duration and the kind of credential provided, so you will need to ascertain what length of program and degree or certificate will best fulfill your needs. Every program provides different possibilities for certification as well. Probably The ideal approach to research your short list of schools is to visit each campus and speak with the students and faculty. Invest some time to attend a few classes. Tour the campus and facilities. Make sure that you are confident that the program you select is the best one for you. With the proper training, effort and commitment, the final result will be a new trade as a professional welder in Southfield MI.

Other Michigan Welder Locations

Southfield, Michigan

Southfield is a city in Oakland County of the U.S. state of Michigan. It is a northern suburb of Detroit. As of the 2010 census, the city had a population of 71,739.[6] A part of Metro Detroit's upscale office market, the city's marque is a cluster of five golden skyscrapers – known as the "Golden Triangle" – that form the contemporary 2,200,000 square feet (204,400 m2) Southfield Town Center office complex with a Westin Hotel and a conference center. In addition, a 33-story luxury residential high-rise is separate from the complex. To the west, near the confluence of I-696/Reuther Freeway and M-10/Lodge Freeway, is the American Center.

Southfield was surveyed in 1817 according to the plan by Michigan territorial governor Lewis Cass.[7] The first settlers came from nearby Birmingham and Royal Oak, Michigan, as well as the states of New York and Vermont. The area that would become Southfield was settled by John Daniels in 1823. Among the founders were the Heth, Stephens, Harmon, McClelland and Thompson families.

Town 1 north, 10 east was first organized as Ossewa Township on July 12, 1830, but the name was changed seventeen days later to Southfield Township.[7] The township took its name from its location in the "south fields" of Bloomfield Township. A US post office was established in 1833 and the first town hall built in 1873.

 

 

Business Results 1 - 10 of 6

Mayo Welding & Fabricating

3 Reviews

Metal Fabricators

Phone:

5061 Delemere Ave, Royal Oak, MI 48073

Beans Best

8 Reviews

Metal Fabricators, Powder Coating, Sandblasting

Phone:

1240 Jewett Ave, Unit 1, Ann Arbor, MI 48104

Metal Mart U S A

2 Reviews

Metal Fabricators

Phone:

31164 Dequindre Rd, Warren, MI 48092

Antieau's Welding

3 Reviews

Metal Fabricators

Phone:

32841 Parklane Ave, Garden City, MI 48135

R&R Door

9 Reviews

Garage Door Services, Keys & Locksmiths

Phone:

5202 Reuter St, Dearborn, MI 48126

Lube-N-Go

5 Reviews

Phone:

28434 Joy Rd, Livonia, MI 48150

 

The post Free Info on Part Time Welding Trade Schools Southfield MI appeared first on How to Become a Welder.