How to Select the Best Welder Certification Course near Statham Georgia
Choosing the right welder vocational school near Statham GA is an essential first step to launching your new occupation as a professional welder. But since there are so many schools to choose from, how do you know which ones to consider? And more significantly, once you have narrowed down your alternatives, how do you select the best one? Most prospective students begin by checking out the schools that are nearest to their homes. Once they have found those that are within commuting distance, they are drawn toward the cheapest one. Yes, location and tuition cost are necessary concerns when reviewing welding trade schools, but they are not the only ones. Other considerations include such things as reputation, accreditation and job placement rates. So before beginning your search for a trade school to become a welder, it’s wise to develop a list of qualifications that your selected school must have. But before we examine our due diligence checklist, let’s talk a little bit about how to become a welder.
Request Free Information on Welding Schools Near You
Welding Degree and Certificate Training Courses
There are several options to receive training as a welder in a trade or vocational school. You can obtain a diploma, a certificate or an Associate Degree. Bachelor Degrees are available in Welding Engineering or Welding Technology, but are more advanced courses than most journeyman welders will need. Some programs are also offered combined with an apprenticeship program. Below are short descriptions of the most common welding programs offered in the Statham GA area.
- Diploma and Certificate Programs are normally offered by trade and technical schools and take about one year to complete. They are more hands-on training in scope, designed primarily to teach welding skills. They can provide a good foundation for a new journeyman or apprentice welder, or additional skills for working welders.
- Associate Degree Programs will take two years to complete and are usually offered by community colleges. An Associate Degree in Welding Technology offers a more extensive education than the diploma or certificate while still furnishing the foundation that prepares students to enter the workforce.
Many municipalities and states do have licensing requirements for welders, so be sure to check for your location of future employment. If needed, the welder school you choose should ready you for any licensing examinations that you will have to take in addition to furnishing the proper training to become a qualified welder.
Click Here to Get Free Information on Welding Schools Near You!
Welder Certification Alternatives
There are multiple institutions that offer welder certifications, which assess the skill level and knowledge of those applying. Many Statham GA employers not only demand a degree or certificate from an accredited welding school, but also certification from a highly regarded agency such as the American Welding Society (AWS). A wide range of certifications are available dependent on the kind of work that the welder does. Some of the things that certification can attest to are the welder’s ability to
- Work in compliance with specific codes
- Work with certain metal thicknesses
- Work with specific kinds of welds
- Perform based on contract specifications
As formerly stated, some cities, states or local municipalities have licensing requirements for welders. Of those requiring licensing, many additionally require certification for various types of work. Certification is also a way to demonstrate to employers that you are a highly skilled and experienced welder. So just as with licensing, look into the requirements for your local area and make certain that the welding trade school you decide on prepares you for certification as needed.
Subjects to Ask Welder Trade Programs
Once you have chosen the credential you would like to attain, a degree, certificate or diploma, you can start to assess schools. As you are no doubt aware, there are many welder vocational and trade schools in the Statham GA area. That’s why it’s necessary to determine in advance what qualifications your chosen school must have. We have already discussed two important ones that many people consider first, which are location and the cost of tuition. As stated, although they are essential qualifiers, they are not the only ones that must be considered. After all, the program you decide on is going to provide the education that will be the foundation of your new profession as a welder. So below are more factors you may want to consider before picking a welder technical school.
Accreditation. It’s very important that the welding trade school you choose is accredited by either a national or a regional agency. There are two standard kinds of accreditation. The school may earn Institutional Accreditation based on all of their programs. Programmatic Accreditation is based on a single program the school has, such as Welding Technology. So make sure that the program you pick is accredited, not just the school itself. Additionally, the accreditation should be by a U.S. Department of Education recognized accrediting agency, like the Accrediting Commission of Career Schools and Colleges of Technology (ACCSCT). Besides helping make sure that you receive a quality education, the accreditation might also help in obtaining financial assistance or student loans, which are frequently not available in Statham GA for schools that are not accredited. Also, for those states or municipalities that mandate licensing, they may require that the welding training program be accredited also.
Job Assistance and Apprenticeship Programs. A large number of welding degree or diploma programs are provided in conjunction with an apprenticeship program. Some other schools will assist in placing you in an apprenticeship or a job upon graduation. Ask if the schools you are considering assist in placing students in apprenticeships or have a job placement program. The schools must have relationships with local unions and other metal working businesses to which they can refer their students. Older schools may have a larger network of graduates that they can rely upon for placements. These programs can help students find employment and develop relationships within the Statham GA welding community.
Job Placement and Completion Rates. The completion rate is the percentage of students that start an academic program and complete it. It’s crucial that the welding program you choose has a high completion rate. A reduced rate may mean that the students who were in the program were unhappy with the training, the instructors, or the facilities, and dropped out. The job placement rate is also an indication of the caliber of training. A high job placement rate will not only confirm that the program has an excellent reputation within the field, but also that it has the network of Statham GA contacts to assist students obtain apprenticeships or employment upon graduation.
Modern Equipment and Facilities. After you have narrowed down your selection of welder programs to 2 or 3 possibilities, you should consider going to the campuses to inspect their facilities. Make sure that both the equipment and the facilities that you will be instructed on are up-to-date. Specifically, the training equipment should be similar to what you will be working with in the field. If you are unsure what to look for, and are currently in an apprenticeship program, consult with the master welder you are working under for guidance. Otherwise, ask a local Statham GA welding contractor if they can give you a few tips.
School Location. Even though we previously briefly covered the significance of location, there are a few additional points that we should address. You should remember that unless you are able to relocate, the welding school you pick needs to be within driving distance of your Statham GA home. If you do choose to enroll in an out-of-state school, apart from moving costs there may be higher tuition fees for out-of-state residents. This is especially the case for welding certificate programs offered by community colleges. Additionally, if the school provides a job placement or apprenticeship program, more than likely their placements are within the school’s local community. So the location of the school needs to be in an area or state where you ultimately will desire to work.
Smaller Classes. One-on-one training is essential for a hands-on trade such as welding. It’s easy to get lost in bigger classes and not get much individualized instruction. Find out what the typical class size is for the welder schools you are reviewing. Inquire if you can sit in on a few classes so that you can observe how much personal attention the students are receiving. While there, talk with several of the students and get their feedback. Similarly, talk with a couple of the instructors and find out what their welding experience has been and what certifications and credentials they have earned.
Flexible Class Scheduling. Some people learn a new trade while still employed at their current job. Verify that the class schedules for the schools you are looking at are flexible enough to satisfy your needs. If you can only attend classes at night or on weekends near Statham GA, confirm that the schools you are reviewing provide those alternatives. If you can only enroll on a part-time basis, verify that the school you decide on offers part-time enrollment. Also, ask what the policy is to make up classes should you miss any due to work, illness or family responsibilities.
Online Welder Degree and Certificate Programs
Welding is truly a hands-on kind of vocation, and for that reason not extremely compatible with online training. However, there are a small number of online welding programs offered by certain community colleges and vocational schools in the greater Statham GA area that can count toward a certificate or degree program. These classes primarily deal with such topics as reading blueprints, safety,, and metallurgy. They can help give a beginner a foundation to initiate their training and education. However, the most critical point is that you can’t learn how to weld or handle welding materials unless you actually do it. Clearly that can’t be done online. These skills have to be learned in an on-campus setting or in an apprenticeship. Online or distance learning is more appropriate for experienced welders that desire to advance their expertise or possibly attain a more advanced degree. So if you should find an online welding degree or certificate program, be very cautious and confirm that the majority of the training is done on campus or in a workshop type of environment.
Affordable Evening Welding Classes Statham GA
Picking the best welder training program will undoubtedly be the most important decision you will make to start your new career. You originally stopped by our website because you had an interest in Affordable Evening Welding Classes and wanted more information on the topic Low Cost Online Welding Classes. However, as we have covered in this article, there are a number of things that you will need to evaluate and compare among the programs you are looking at. It’s a necessity that any welding training program that you are considering includes a good deal of hands-on training. Classes should be smaller in size and every student should have their personal welding machine to train on. Classroom education needs to provide a real-world frame of reference, and the course of study should be current and conform with industry standards. Courses differ in length and the kind of credential provided, so you will need to determine what length of program and credential will best fulfill your needs. Every program provides different possibilities for certification as well. Probably The ideal approach to research your short list of schools is to check out each campus and speak with the teachers and students. Invest some time to attend a few classes. Inspect the campus and facilities. Make sure that you are confident that the training program you choose is the best one for you. With the right training, hard work and commitment, the end result will be a new career as a professional welder in Statham GA.
Other Georgia Welder Locations
Statham, Georgia
According to the United States Census Bureau, the city has a total area of 3.6 square miles (9.3 km2), of which 3.5 square miles (9.1 km2) is land and 0.1 square miles (0.26 km2), or 1.08%, is water.[4]
As of the census[2] of 2000, there were 2,040 people, 731 households, and 551 families residing in the city. The population density was 577.9 people per square mile (223.1/km²). There were 774 housing units at an average density of 219.3 per square mile (84.7/km²). The racial makeup of the city was 82.35% White, 14.66% African American, 0.69% Native American, 0.49% Asian, 0.05% Pacific Islander, 0.83% from other races, and 0.93% from two or more races. Hispanic or Latino of any race were 2.30% of the population.
There were 731 households out of which 38.7% had children under the age of 18 living with them, 56.4% were married couples living together, 14.4% had a female householder with no husband present, and 24.6% were non-families. 20.1% of all households were made up of individuals and 7.9% had someone living alone who was 65 years of age or older. The average household size was 2.73 and the average family size was 3.13.
Business Results 1 - 10 of 4
1 Reviews 
3 Reviews 
2 Reviews 
1 Reviews 