Choosing the right welding technical school near Monroe CT is an important first step to launching your new career as a professional welder. But since there are numerous schools to select from, how do you determine which ones to consider? And more notably, once you have narrowed down your options, how do you select the right one? Many people start by reviewing the schools that are nearest to their homes. When they have located those that are within driving distance, they are drawn toward the cheapest one. Yes, location and the cost of tuition are crucial concerns when reviewing welder technical schools, but they are not the only ones. Other factors include such things as reputation, accreditation and job placement rates. So before starting your search for a trade school to become a welder, it’s wise to establish a list of qualifications that your selected school must have. But before we explore our due diligence checklist, let’s cover a little bit about how to become a welder.

Request Free Information on Welding Schools Near You

[campusexplorer header_text=”Find Welding Schools Near You!” aos=”53237562″ concentration=”025A8616″ tracking=”WELDER-5″]

Welder Certificate and Degree Training Classes

There are multiple options available to get training as a welder in a trade or technical school. You can receive a a certificate, a diploma or an Associate Degree. Bachelor Degrees are available in Welding Engineering or Welding Technology, but are more advanced degrees than most journeyman welders will need. Some programs are also made available along with an apprenticeship program. Below are short summaries of the most common welding programs offered in the Monroe CT area.

• Diploma and Certificate Programs are generally made available by technical and trade schools and require about a year to finish. They are more hands-on training in scope, designed primarily to develop welding skills. They can provide a good foundation for a new journeyman or apprentice welder, or supplemental skills for working welders.
• Associate Degree Programs will take two years to complete and are usually offered by community colleges. An Associate Degree in Welding Technology provides a more well-rounded education than the diploma or certificate while still providing the foundation that prepares students to enter the workforce.

Many states and municipalities do have licensing requirements for welders, so make sure to check for your location of future employment. If required, the welder school you pick should prepare you for any licensing exams that you will need to pass in addition to furnishing the suitable training to become a professional welder.

[campusexplorer header_text=”Find Welding Schools Near You!” aos=”53237562″ concentration=”025A8616″ is_lightbox=”1″ lightbox_btn_text=”Click Here to Get Free Information on Welding Schools Near You!” tracking=”WELDER-5LB”]

Welder Certification Options

There are several organizations that offer welding certifications, which test the skill level and knowledge of those applying. A large number of Monroe CT employers not only expect a certificate or degree from an accredited welding school, but also certification from a respected agency such as the American Welding Society (AWS). Different certifications are offered based upon the type of work that the welder does. Some of the things that certification can acknowledge are the welder’s ability to

• Operate in compliance with specific codes
• Work with specified metal thicknesses
• Work with certain kinds of welds
• Operate according to contract specifications

As earlier stated, some cities, states or local municipalities have licensing requirements for welders. Of those mandating licensing, many also require certification for different kinds of work. Certification is also a way to demonstrate to employers that you are an extremely skilled and qualified welder. So similarly as with licensing, check the requirements for your location and make certain that the welding tech school you decide on prepares you for certification as needed.

What to Ask Welding Vocational Programs

As soon as you have decided on the credential you would like to attain, a certificate, diploma or degree, you can start to assess schools. As you are no doubt aware, there are many welder trade and technical schools in the Monroe CT area. That’s why it’s necessary to establish up front what qualifications your selected school must have. We have previously discussed a couple of important ones that many people look at first, which are location and tuition cost. As stated, although they are very important qualifiers, they are not the only ones that must be considered. After all, the program you choose is going to furnish the instruction that will be the foundation of your new career as a welder. So below are some additional factors you might need to evaluate before picking a welder vocational school.

Accreditation. It’s extremely important that the welding tech school you decide on is accredited by either a national or a regional organization. There are 2 standard kinds of accreditation. The school may earn Institutional Accreditation based on all of their programs. Programmatic Accreditation is based on an individual program the school has, such as Welding Technology. So confirm that the program you choose is accredited, not just the school itself. Also, the accreditation should be by a U.S. Department of Education recognized accrediting organization, for example the Accrediting Commission of Career Schools and Colleges of Technology (ACCSCT). In addition to helping ensure that you obtain an excellent education, the accreditation may also help in getting financial aid or student loans, which are in many cases unavailable in Monroe CT for schools that are not accredited. Finally, for those states or local governments that mandate licensing, they may require that the welding training program be accredited as well.

Apprenticeship and Job Placement Programs. Many welder diploma or degree programs are provided combined with an apprenticeship program. Other schools will assist in placing you in a job or an apprenticeship after graduation. Ask if the schools you are considering assist in placing students in apprenticeships or have a job assistance program. The schools must have associations with local unions and various metal working businesses to which they can refer their students. More established schools may have a larger network of graduates that they can utilize for referrals. These programs can help students find employment and develop associations within the Monroe CT welding community.

Completion and Job Placement Rates. The completion rate is the portion or percentage of students that begin an instructional program and finish it. It’s essential that the welding school you pick has a higher completion rate. A low rate might indicate that the students who joined the program were unhappy with the instruction, the teachers, or the facilities, and dropped out. The job placement rate is also an indication of the quality of training. A high job placement rate will not only verify that the school has an excellent reputation within the field, but also that it has the network of Monroe CT contacts to help students obtain apprenticeships or employment upon graduation.

Up-to-date Equipment and Facilities. Once you have limited your choice of welding programs to 2 or 3 possibilities, you should think out going to the campuses to inspect their facilities. Verify that both the facilities and the equipment that you will be trained on are up-to-date. Specifically, the training equipment should be comparable to what you will be using on the job. If you are unsure what to look for, and are already in an apprenticeship program, consult with the master welder you are working under for guidance. Otherwise, ask a local Monroe CT welding contractor if they can give you some suggestions.

School Location. Even though we previously briefly talked about the importance of location, there are a few additional points that we need to cover. You should remember that unless you are able to move, the welding school you pick must be within driving distance of your Monroe CT home. If you do opt to enroll in an out-of-state school, in addition to relocation expenses there could be higher tuition fees for out-of-state residents. This is especially true for welder certificate programs offered by community colleges. Furthermore, if the school offers an apprenticeship or job placement program, most likely their placements are within the school’s regional community. So the location of the school should be in an area or state where you ultimately will desire to work.

Smaller Classes. One-on-one instruction is essential for a manual trade such as welding. It’s possible to get overlooked in larger classes and not receive much individualized instruction. Find out what the usual class size is for the welder programs you are considering. Inquire if you can sit in on some classes so that you can experience just how much individual attention the students are getting. While there, talk with some of the students and get their feedback. Similarly, talk to some of the teachers and ask what their welding experience has been and what certifications and credentials they have earned.

Convenient Class Schedules. Lots of folks learn a new profession while still employed at their current job. Make sure that the class schedules for the schools you are reviewing are flexible enough to meet your needs. If you can only go to classes at night or on weekends near Monroe CT, confirm that the schools you are considering provide those choices. If you can only attend on a part-time basis, verify that the school you pick offers part-time enrollment. Also, check to see what the protocol is to make up classes should you miss any because of illness, work or family circumstances.

Online Welding Degree and Certificate Programs

Welding is truly a manual type of profession, and for that reason not very compatible with training online. Having said that, there are some online welding courses offered by various community colleges and trade schools in the greater Monroe CT area that can be credited toward a degree or certificate program. These classes mainly cover such subjects as reading blueprints, safety,, and metallurgy. They can help give a novice a foundation to start their training and education. Nevertheless, the most significant point is that you can’t learn how to weld or use welding materials until you actually do it. Naturally that can’t be performed online. These skills need to be learned in an on-campus environment or in an apprenticeship. Online or distance learning is more appropriate for experienced welders that desire to advance their knowledge or perhaps attain a more advanced degree. So if you should come across an online welding degree or certificate program, be extremely cautious and verify that the larger part of the training is done on campus or in a workshop type of setting.

Trade School Welding Monroe CT

Selecting the ideal welding training program will probably be the most important decision you will make to begin your new career. You originally stopped by our website because you had an interest in Trade School Welding and wanted more information on the topic Welding College Courses. However, as we have covered in this article, there are many factors that you will need to evaluate and compare between the programs you are reviewing. It’s a must that any welder school that you are reviewing includes a considerable amount of hands-on training. Classes should be small in size and every student must have their own welding machine to train with. Classroom teaching needs to provide a real-world context, and the curriculum should be up-to-date and in-line with industry standards. Courses differ in length and the type of credential offered, so you will need to determine what length of program and degree or certificate will best fulfill your needs. Each program provides unique options for certification as well. Perhaps The ideal means to research your short list of schools is to go to each campus and speak with the faculty and students. Invest some time to monitor a few classes. Inspect the campus and facilities. Make sure that you are confident that the school you choose is the right one for you. With the right training, hard work and commitment, the end result will be a new occupation as a professional welder in Monroe CT.

Other Connecticut Welder Locations

Monroe, Connecticut

According to the United States Census Bureau, the town has a total area of 26.3 square miles (68 km2), of which 26.1 square miles (68 km2) is land and 0.2 square miles (0.52 km2), or 0.76%, is water. The Pequonnock River begins in Monroe in Wolfe Park. Monroe borders Lake Zoar, a reservoir on the Housatonic River formed by Stevenson Dam.

On May 15, 1656, the Court of the Colony of Connecticut in Hartford affirmed that the town of Stratford included all of the territory 12 miles (19 km) inland from Long Island Sound, between the Housatonic River and the Fairfield town line, to include the southern portion of present-day Monroe. In 1662, Stratford selectmen Lt. Joseph Judson, Captain Joseph Hawley and John Minor secured all the written deeds of transfer from the Golden Hill Paugussett Indian Nation for this vast territory that comprises the present-day towns of Trumbull, Shelton and Monroe. In 1671, Stratford purchased from the Paugusset Indians the territory which included the remainder of the northern portions of Monroe, Trumbull and Shelton, in what is known as "The White Hills Purchase", and officially annexed it to the Township of Stratford.

As of the census[6] of 2000, there were 19,247 people, 6,481 households, and 5,346 families residing in the town. The population density was 736.5 people per square mile (284.4/km²). There were 6,601 housing units at an average density of 252.6 per square mile (97.5/km²). The racial makeup of the town was 92.8% White, 0.20% African American, 0.08% Native American, 2.62% Asian, 0.50% from other races, and 0.83% from two or more races. Hispanic or Latino people of any race were 2.20% of the population.

 

 

Business Results 1 - 10 of 5

Carrano's Railing & Welding

2 Reviews

Metal Fabricators

Phone:

1130 Sherman Ave, Hamden, CT 06514

Tony's Portable Welding Service

2 Reviews

Metal Fabricators, Demolition Services, Excavation Services

Phone:

389 Ira Pl, Bayport, NY 11705

City Gates USA

8 Reviews

Metal Fabricators

Phone:

1520 129th St, College Point, NY 11356

Doctor Gate

29 Reviews

Fences & Gates, Garage Door Services, Door Sales/Installation

Phone:

66 Cheever Pl, Brooklyn, NY 11231

 

The post Trade School Welding Monroe CT appeared first on How to Become a Welder.