Choosing the right welding vocational school near Oglethorpe GA is an essential first step to launching your new occupation as a professional welder. But since there are so many schools to choose from, how do you know which ones to consider? And more significantly, once you have narrowed down your options, how do you select the best one? A number of prospective students start by checking out the schools that are closest to their homes. Once they have located those that are within driving distance, they gravitate toward the least expensive one. Yes, location and the cost of tuition are crucial considerations when evaluating welding vocational schools, but they are not the only ones. Other considerations include such things as reputation, accreditation and job placement rates. So before beginning your search for a trade school to become a welder, it’s sensible to develop a list of qualifications that your chosen school must have. But before we explore our due diligence checklist, let’s talk a little bit about how to become a welder.

Request Free Information on Welding Schools Near You

[campusexplorer header_text=”Find Welding Schools Near You!” aos=”53237562″ concentration=”025A8616″ tracking=”WELDER-5″]

Welder Degree and Certificate Training Programs

There are a number of alternatives available to obtain training as a welder in a technical or trade school. You can receive a diploma, a certificate or an Associate Degree. Bachelor Degrees are available in Welding Engineering or Welding Technology, but are more advanced degrees than most journeyman welders will need. Some programs are also made available in conjunction with an apprenticeship program. Following are short explanations of the most typical welding programs available in the Oglethorpe GA area.

• Certificate and Diploma Programs are normally made available by trade and technical schools and require about a year to finish. They are more hands-on training in nature, designed mainly to develop welding skills. They can furnish a good foundation for a new journeyman or apprentice welder, or supplemental skills for experienced welders.
• Associate Degree Programs will take 2 years to finish and are most often offered by community colleges. An Associate Degree in Welding Technology provides a more extensive education than the certificate or diploma while still supplying the foundation that prepares students to enter the workforce.

A number of municipalities and states do have licensing requirements for welders, so make sure to find out for your location of potential employment. As required, the welding school you choose should ready you for any licensing examinations that you will have to pass in addition to providing the suitable training to become a qualified welder.

[campusexplorer header_text=”Find Welding Schools Near You!” aos=”53237562″ concentration=”025A8616″ is_lightbox=”1″ lightbox_btn_text=”Click Here to Get Free Information on Welding Schools Near You!” tracking=”WELDER-5LB”]

Welder Certification Options

There are several institutions that provide welder certifications, which evaluate the skill level and knowledge of those applying. Many Oglethorpe GA employers not only require a certificate or degree from an accredited welding school, but also certification from a highly regarded agency such as the American Welding Society (AWS). A wide range of certifications are offered based on the kind of work that the welder performs. Some of the skills that certification can attest to are the welder’s ability to

• Operate in compliance with specific codes
• Work with specific metal thicknesses
• Work with certain kinds of welds
• Perform based on contract specifications

As previously mentioned, many cities, states or local municipalities have licensing requirements for welders. Of those requiring licensing, a number also require certification for different kinds of work. Certification is also a way to prove to employers that you are an exceptionally skilled and qualified welder. So similarly as with licensing, check the requirements for your location and confirm that the welder trade school you decide on prepares you for certification as needed.

Questions to Ask Welding Technical Programs

When you have chosen the credential you want to obtain, a certificate, diploma or degree, you can begin to evaluate schools. As you probably know, there are a large number of welder trade and vocational schools in the Oglethorpe GA area. That’s why it’s necessary to establish up front what qualifications your school of choice must have. We have already covered 2 significant ones that most people consider first, which are location and tuition cost. As stated, although they are very important qualifications, they are not the only ones that should be considered. After all, the school you select is going to provide the instruction that will be the foundation of your new profession as a welder. So following are some additional factors you might want to evaluate before selecting a welder tech school.

Accreditation. It’s essential that the welding tech school you pick is accredited by either a regional or a national agency. There are two standard kinds of accreditation. The school may attain Institutional Accreditation based on all of their programs. Programmatic Accreditation is based on an individual program the school offers, such as Welding Technology. So make certain that the program you select is accredited, not just the school alone. Additionally, the accreditation should be by a U.S. Department of Education recognized accrediting organization, for example the Accrediting Commission of Career Schools and Colleges of Technology (ACCSCT). Besides helping ensure that you get a superior education, the accreditation may also help in obtaining financial assistance or student loans, which are in many cases not available in Oglethorpe GA for non-accredited schools. Finally, for those states or local governments that mandate licensing, they may require that the welding training program be accredited as well.

Apprenticeship and Job Placement Programs. A large number of welder diploma or degree programs are provided combined with an apprenticeship program. Other schools will help place you in an apprenticeship or a job upon graduation. Find out if the schools you are reviewing assist in placing students in apprenticeships or have a job placement program. These schools should have associations with local unions and various metal working businesses to which they can place their students. More established schools may have a more substantial network of graduates that they can utilize for referrals. These programs can help students find employment and develop associations within the Oglethorpe GA welding community.

Job Placement and Completion Rates. The completion rate is the percentage of students that enroll in an instructional program and complete it. It’s important that the welding program you pick has a high completion rate. A low rate may signify that the students who joined the program were unhappy with the training, the teachers, or the facilities, and quit. The job placement rate is also an indication of the caliber of training. A higher job placement rate will not only confirm that the program has a good reputation within the field, but additionally that it has the network of Oglethorpe GA employer relationships to assist students secure apprenticeships or employment upon graduation.

Up-to-date Equipment and Facilities. After you have decreased your choice of welder programs to two or three possibilities, you should think out visiting the campuses to look over their facilities. Make sure that both the facilities and the equipment that you will be instructed on are up-to-date. Specifically, the training equipment should be similar to what you will be using on the job. If you are unsure what to look for, and are already in an apprenticeship program, consult with the master welder you are working under for guidance. If not, ask a local Oglethorpe GA welding professional if they can give you some pointers.

School Location. Even though we previously briefly covered the relevance of location, there are a couple of additional issues that we should address. You should bear in mind that unless you can relocate, the welder school you pick needs to be within driving distance of your Oglethorpe GA home. If you do choose to enroll in an out-of-state school, besides moving expenses there could be higher tuition fees for out-of-state residents. This is particularly the case for welder diploma programs offered by community colleges. Additionally, if the school provides an apprenticeship or job placement program, often their placements are within the school’s regional community. So the location of the school needs to be in a region or state where you subsequently will wish to work.

Smaller Classes. Personalized training is important for a hands-on trade such as welding. It’s possible to be lost in larger classes and not receive much individualized instruction. Find out what the average class size is for the welder programs you are reviewing. Inquire if you can sit in on some classes so that you can observe how much personal attention the students are receiving. While there, talk with some of the students and get their opinions. Similarly, talk to a few of the trainers and find out what their welding experience has been and what credentials and certifications they hold.

Convenient Class Schedules. Lots of folks learn a new trade while still working at their current job. Confirm that the class schedules for the schools you are looking at are flexible enough to fulfill your needs. If you can only attend classes in the evenings or on weekends near Oglethorpe GA, verify that the schools you are looking at offer those alternatives. If you can only enroll part-time, confirm that the school you pick offers part-time enrollment. Also, check to see what the protocol is to make up classes if you you miss any due to illness, work or family circumstances.

Online Welder Degree and Certificate Programs

Welding is truly a hands-on kind of trade, and for that reason not very suitable for online training. However, there are a few online welding classes offered by specific community colleges and trade schools in the greater Oglethorpe GA area that may be credited toward a degree or certificate program. These classes primarily deal with such subjects as reading blueprints, safety,, and metallurgy. They can help give a novice a foundation to initiate their education and training. However, the most critical point is that you can’t learn how to weld or work with welding materials unless you actually do it. Naturally that can’t be performed online. These skills must be learned in an on-campus setting or in an apprenticeship. Online or distance learning is better suited for experienced welders that want to advance their expertise or possibly attain a more advanced degree. So if you should find an online welding certificate or degree program, be very cautious and make sure that the majority of the training is done on campus or in a workshop type of environment.

Affordable Accelerated Welding Colleges Oglethorpe GA

Selecting the ideal welding school will probably be the most critical decision you will make to begin your new career. You originally stopped by our website because you had an interest in Affordable Accelerated Welding Colleges and wanted more information on the topic Low Cost Local Welding Colleges. However, as we have discussed in this article, there are a number of things that you will need to examine and compare between the schools you are looking at. It’s a prerequisite that any welder training that you are reviewing includes a good deal of hands-on instruction. Classes need to be smaller in size and every student should have their personal welding machine to train on. Classroom education needs to offer a real-world perspective, and the curriculum should be up-to-date and conform with industry standards. Programs differ in length and the type of credential provided, so you will have to decide what length of program and credential will best satisfy your needs. Every program offers different possibilities for certification also. Perhaps the best way to research your short list of schools is to go to each campus and speak with the students and instructors. Invest some time to sit in on a few classes. Tour the campus and facilities. Make sure that you are confident that the training program you decide on is the best one for you. With the proper training, effort and commitment, the end result will be a new occupation as a professional welder in Oglethorpe GA.

Other Georgia Welder Locations

Fort Oglethorpe, Georgia

Fort Oglethorpe is a city predominantly in Catoosa County with some portions in Walker County in the U.S. state of Georgia.[4] As of the 2010 census, the city had a population of 9,263.[5] It is part of the Chattanooga, TN–GA Metropolitan Statistical Area. It is home to Lakeview – Fort Oglethorpe High School.

The United States Army established a cavalry post at the site of Hargrave, Georgia, an unincorporated town situated next to the Chickamauga National Battlefield. The existing settlement was named for a Confederate soldier, William Hamilton Hargrave, who along with his wife Amelia Cecilia Strange-Hargrave owned most of the land in the area. The couple was well known in the 19th century to travellers heading to Ross's Landing on the Tennessee River from LaFayette, Georgia. William Hargrave and other landowners in the area were forced to sell their property to the Army[citation needed] to be used as a base for the 6th Cavalry. The Chickamauga Post established in 1902 by the U.S. Army was later named Fort Oglethorpe after James Oglethorpe, the founder of the Colony of Georgia. During World War I and World War II, the area served as a war-time induction and processing center, and also housed German prisoners of war.[6] Fort Oglethorpe was a major training center for the Women's Army Corps during World War II. The post was declared surplus in 1947 and sold to civilians, forming the nucleus for a city that was incorporated in 1949.[7][8]

Fort Oglethorpe is located in western Catoosa County and northeastern Walker County at 34°56′44″N 85°14′44″W / 34.94556°N 85.24556°W / 34.94556; -85.24556 (34.945683, -85.245653).[9] It is 9 miles (14 km) south of Chattanooga, Tennessee, by U.S. Route 27, which also leads south 18 miles (29 km) to LaFayette, Georgia. The Chickamauga and Chattanooga National Military Park takes up the southern two-thirds of the city's area.

 

 

Business Results 1 - 10 of 1

weldcraft ironworks

2 Reviews

Metal Fabricators, Fences & Gates, Sandblasting

Phone:

1636 Peach Pkwy, Fort Valley, GA 31030

 

The post Affordable Accelerated Welding Colleges Oglethorpe GA appeared first on How to Become a Welder.