Enrolling in the ideal welding vocational school near Athens WI is an important first step to starting your new career as a professional welder. But since there are so many schools to pick from, how do you determine which ones to consider? And more notably, once you have narrowed down your choices, how do you pick the best one? Many prospective students begin by looking at the schools that are nearest to their residences. Once they have identified those that are within commuting distance, they gravitate toward the cheapest one. Yes, location and the cost of tuition are important issues when examining welding vocational schools, but they are not the only ones. Other concerns include such things as reputation, accreditation and job placement rates. So before initiating your search for a trade school to become a welder, it’s prudent to develop a list of qualifications that your selected school must have. But before we delve into our due diligence checklist, let’s cover a little bit about how to become a welder.

Request Free Information on Welding Schools Near You

[campusexplorer header_text=”Find Welding Schools Near You!” aos=”53237562″ concentration=”025A8616″ tracking=”WELDER-5″]

Welder Certificate and Degree Programs

There are several options available to obtain training as a welder in a technical or trade school. You can obtain a a certificate, a diploma or an Associate Degree. Bachelor Degrees are available in Welding Engineering or Welding Technology, but are more advanced degrees than most journeyman welders will need. Some programs are also made available along with an apprenticeship program. Following are brief descriptions of the most common welding programs offered in the Athens WI area.

• Diploma and Certificate Programs are generally made available by technical and trade schools and require about one year to finish. They are more hands-on training in nature, created mainly to teach welding skills. They can furnish a good foundation for a new journeyman or apprentice welder, or additional skills for experienced welders.
• Associate Degree Programs will take two years to complete and are usually offered by community colleges. An Associate Degree in Welding Technology provides a more well-rounded education than the diploma or certificate while still supplying the foundation that prepares students to enter the workforce.

Some states and municipalities do have licensing prerequisites for welders, therefore don’t forget to check for your location of potential employment. If required, the welding school you pick should ready you for any licensing exams that you will need to take in addition to furnishing the proper training to become a qualified welder.

[campusexplorer header_text=”Find Welding Schools Near You!” aos=”53237562″ concentration=”025A8616″ is_lightbox=”1″ lightbox_btn_text=”Click Here to Get Free Information on Welding Schools Near You!” tracking=”WELDER-5LB”]

Welding Certification Options

There are several organizations that provide welding certifications, which evaluate the knowledge and skill level of those applying. Numerous Athens WI employers not only demand a certificate or degree from an accredited welding program, but also certification from a respected organization like the American Welding Society (AWS). Different certifications are available based on the type of work that the welder performs. A few of the things that certification can attest to are the welder’s ability to

• Work in compliance with specific codes
• Work with certain metal thicknesses
• Work with certain types of welds
• Operate in compliance with contract specifications

As already stated, many states, cities or local municipalities have licensing requirements for welders. Of those mandating licensing, a number additionally require certification for different kinds of work. Certification is also a means to prove to employers that you are an exceptionally skilled and knowledgeable welder. So just as with licensing, check the requirements for your location and make sure that the welding technical school you decide on readies you for certification if needed.

Questions to Ask Welding Technical Programs

After you have chosen the credential you want to earn, a degree, certificate or diploma, you can begin to evaluate schools. As you are no doubt aware, there are numerous welding vocational and trade schools in the Athens WI area. That’s why it’s essential to decide up front what qualifications your chosen school must have. We have already discussed 2 significant ones that most people look at first, which are location and tuition cost. As stated, although they are essential qualifications, they are not the only ones that must be looked at. After all, the program you decide on is going to furnish the education that will be the foundation of your new career as a welder. So following are more factors you may need to evaluate before picking a welding tech school.

Accreditation. It’s very important that the welding technical school you pick is accredited by either a national or a regional organization. There are 2 basic kinds of accreditation. The school may receive Institutional Accreditation based on all of their programs. Programmatic Accreditation is based on a specific program the school has, for instance Welding Technology. So make sure that the program you choose is accredited, not just the school alone. Additionally, the accreditation should be by a U.S. Department of Education recognized accrediting organization, such as the Accrediting Commission of Career Schools and Colleges of Technology (ACCSCT). Besides helping make sure that you get a quality education, the accreditation might also assist in obtaining financial aid or student loans, which are often not available in Athens WI for non-accredited schools. Finally, for those states or municipalities that mandate licensing, they may require that the welding training program be accredited also.

Apprenticeship and Job Placement Programs. Many welding degree or diploma programs are provided combined with an apprenticeship program. Various other schools will help place you in an apprenticeship or a job after graduation. Ask if the schools you are considering help in placing students in apprenticeships or have a job assistance program. These schools must have partnerships with local unions and other metal working businesses to which they can refer their students. More established schools may have a more substantial network of graduates that they can rely upon for referrals. These programs can help students find employment and develop relationships within the Athens WI welding community.

Completion and Job Placement Rates. The completion rate is the portion or percentage of students that begin an educational program and finish it. It’s important that the welding program you choose has a high completion rate. A lower rate might signify that the students who were in the program were dissatisfied with the instruction, the teachers, or the facilities, and quit. The job placement rate is also a good indicator of the caliber of training. A higher job placement rate will not only verify that the program has a good reputation within the industry, but also that it has the network of Athens WI contacts to assist students obtain employment or apprenticeships after graduation.

Modern Facilities and Equipment. Once you have limited your choice of welder schools to 2 or 3 options, you should consider going to the campuses to look over their facilities. Make sure that both the facilities and the equipment that you will be instructed on are up-to-date. Specifically, the training equipment should be comparable to what you will be working with in the field. If you are not sure what to look for, and are currently in an apprenticeship program, consult with the master welder you are working under for guidance. If not, ask a local Athens WI welding professional if they can give you a few suggestions.

School Location. Although we already briefly covered the significance of location, there are a couple of additional issues that we should address. You should keep in mind that unless you can move, the welder program you pick must be within driving distance of your Athens WI home. If you do decide to enroll in an out-of-state school, apart from relocation expenses there might be higher tuition fees for out-of-state residents. This is especially the case for welder certificate programs offered by community colleges. Furthermore, if the school offers a job placement or apprenticeship program, most likely their placements are within the school’s regional community. So the location of the school should be in a region or state where you subsequently will desire to work.

Small Classes. One-on-one instruction is important for a manual trade such as welding. It’s possible to be overlooked in larger classes and not receive much personalized training. Ask what the typical class size is for the welder programs you are considering. Inquire if you can attend a few classes so that you can observe just how much personal attention the students are receiving. While there, speak with a few of the students and get their evaluations. Similarly, chat with some of the trainers and find out what their welding experience has been and what credentials and certifications they hold.

Flexible Class Schedules. Lots of folks learn a new trade while still employed at their present job. Confirm that the class schedules for the programs you are considering are flexible enough to meet your needs. If you can only attend classes in the evenings or on weekends near Athens WI, make sure that the schools you are assessing offer those choices. If you can only attend on a part-time basis, verify that the school you pick offers part-time enrollment. Also, find out what the protocol is to make up classes if you you miss any due to illness, work or family emergencies.

Online Welding Classes

Welding is truly a manual type of profession, and consequently not very compatible with online training. However, there are a few online welding courses offered by certain community colleges and trade schools in the greater Athens WI area that may count toward a certificate or degree program. These classes primarily deal with such topics as reading blueprints, safety,, and metallurgy. They can help give a beginner a basis to initiate their education and training. However, the most critical point is that you can’t learn how to weld or work with welding materials unless you actually do it. Obviously that can’t be accomplished online. These skills must be learned in an on-campus environment or in an apprenticeship. Online or distance learning is more appropriate for seasoned welders that desire to advance their knowledge or perhaps obtain a more advanced degree. So if you should come across an online welding degree or certificate program, be very careful and make sure that the bulk of the training is done on campus or in a workshop type of setting.

Free Info on Night Welding Programs Athens WI

Picking the right welder training program will probably be the most important decision you will make to launch your new trade. You originally stopped by our website because you had an interest in Free Info on Night Welding Programs and wanted more information on the topic Affordable Accredited Welding Programs. However, as we have addressed in this article, there are many things that you will need to examine and compare between the programs you are considering. It’s a necessity that any welding school that you are evaluating includes a lot of hands-on training. Classes need to be small in size and each student must have their own welding machine to train on. Classroom instruction should offer a real-world perspective, and the curriculum should be up-to-date and in-line with industry standards. Programs vary in length and the kind of credential offered, so you will have to decide what length of program and certificate or degree will best satisfy your needs. Each program provides different options for certification also. Probably the best way to research your final list of schools is to check out each campus and speak with the teachers and students. Take the time to attend a few classes. Tour the campus and facilities. Make certain that you are confident that the program you pick is the right one for you. With the proper training, hard work and dedication, the final outcome will be a new trade as a professional welder in Athens WI.

Other Wisconsin Welder Locations

Athens, Wisconsin

Athens is located at 45°1′58″N 90°4′35″W / 45.03278°N 90.07639°W / 45.03278; -90.07639 (45.032641, -90.076442).[7] Athens is almost halfway between the Equator and North Pole, as well as almost halfway between the Prime Meridian and 180th meridian. The Athens area is primarily agricultural with a small industrial park on the south side of the village limits.

As of the census[3] of 2010, there were 1,105 people, 471 households, and 298 families residing in the village. The population density was 449.2 inhabitants per square mile (173.4/km2). There were 503 housing units at an average density of 204.5 per square mile (79.0/km2). The racial makeup of the village was 96.2% White, 0.2% African American, 0.2% Native American, 0.2% Asian, 2.4% from other races, and 0.8% from two or more races. Hispanic or Latino of any race were 4.9% of the population.

There were 471 households of which 30.1% had children under the age of 18 living with them, 50.7% were married couples living together, 8.1% had a female householder with no husband present, 4.5% had a male householder with no wife present, and 36.7% were non-families. 30.1% of all households were made up of individuals and 14.4% had someone living alone who was 65 years of age or older. The average household size was 2.35 and the average family size was 2.96.

 

 

Business Results 1 - 10 of 0

 

The post Free Info on Night Welding Programs Athens WI appeared first on How to Become a Welder.