Selecting the right welder vocational school near Rex GA is an important first step to starting your new career as a professional welder. But since there are a lot of schools to pick from, how do you know which ones to consider? And more significantly, once you have fine tuned your choices, how do you pick the right one? Many people start by looking at the schools that are closest to their homes. Once they have found those that are within driving distance, they gravitate toward the least expensive one. Yes, location and the cost of tuition are necessary considerations when evaluating welding vocational schools, but they are not the only ones. Other factors include such things as accreditation, reputation and job placement rates. So before starting your search for a vocational school to become a welder, it’s prudent to develop a list of qualifications that your chosen school must have. But before we examine our due diligence checklist, let’s cover a little bit about how to become a welder.

Request Free Information on Welding Schools Near You

[campusexplorer header_text=”Find Welding Schools Near You!” aos=”53237562″ concentration=”025A8616″ tracking=”WELDER-5″]

Welder Degree and Certificate Training Programs

There are a number of alternatives available to obtain training as a welder in a technical or trade school. You can receive a a certificate, a diploma or an Associate Degree. Bachelor Degrees are available in Welding Technology or Welding Engineering, but are more advanced degrees than most journeyman welders will need. Some programs are also made available combined with an apprenticeship program. Following are brief summaries of the most typical welding programs offered in the Rex GA area.

• Diploma and Certificate Programs are normally offered by technical and trade schools and require about 1 year to complete. They are more hands-on training in scope, created primarily to teach welding skills. They can furnish a good foundation for a new journeyman or apprentice welder, or specialized skills for experienced welders.
• Associate Degree Programs will take two years to complete and are usually offered by community colleges. An Associate Degree in Welding Technology provides a more extensive education than the diploma or certificate while still furnishing the foundation that prepares students to enter the workforce.

Some states and municipalities do have licensing prerequisites for welders, therefore don’t forget to check for your location of potential employment. As required, the welder school you select should prepare you for any licensing examinations that you will have to pass in addition to providing the suitable training to become a professional welder.

[campusexplorer header_text=”Find Welding Schools Near You!” aos=”53237562″ concentration=”025A8616″ is_lightbox=”1″ lightbox_btn_text=”Click Here to Get Free Information on Welding Schools Near You!” tracking=”WELDER-5LB”]

Welding Certification Options

There are a number of institutions that offer welder certifications, which test the skill level and knowledge of those applying. A large number of Rex GA employers not only demand a degree or certificate from an accredited welding school, but also certification from a respected agency such as the American Welding Society (AWS). A wide range of certifications are offered dependent on the type of work that the welder performs. Just some of the things that certification can acknowledge are the welder’s ability to

• Work in compliance with specific codes
• Work with specified metal thicknesses
• Work with specific kinds of welds
• Work in compliance with contract specifications

As earlier stated, various states, cities or local municipalities have licensing requirements for welders. Of those requiring licensing, many also require certification for various types of work. Certification is also a way to demonstrate to employers that you are an extremely skilled and qualified welder. So similarly as with licensing, look into the requirements for your local area and make sure that the welder vocational school you decide on readies you for certification as needed.

Questions to Ask Welder Trade Programs

After you have chosen the credential you would like to earn, a certificate, diploma or degree, you can start to evaluate schools. As you probably know, there are many welder vocational and trade schools in the Rex GA area. That’s why it’s essential to determine up front what qualifications your school of choice must have. We have already covered two important ones that most people consider first, which are location and tuition cost. As stated, although they are essential qualifications, they are not the only ones that must be considered. After all, the school you decide on is going to provide the instruction that will be the foundation of your new vocation as a welder. So following are some additional factors you might want to consider before picking a welder trade school.

Accreditation. It’s very important that the welder technical school you decide on is accredited by either a regional or a national agency. There are two standard types of accreditation. The school may receive Institutional Accreditation based on all of their programs. Programmatic Accreditation is based on an individual program the school has, for example Welding Technology. So make certain that the program you select is accredited, not just the school itself. Additionally, the accreditation should be by a U.S. Department of Education recognized accrediting organization, for example the Accrediting Commission of Career Schools and Colleges of Technology (ACCSCT). Besides helping make sure that you get a superior education, the accreditation might also help in securing financial assistance or student loans, which are in many cases not available in Rex GA for non-accredited schools. Finally, for those states or local governments that require licensing, they may require that the welder training program be accredited as well.

Apprenticeship and Job Assistance Programs. Numerous welding degree or certificate programs are offered combined with an apprenticeship program. Other schools will help place you in a job or an apprenticeship after graduation. Find out if the schools you are looking at help in placing students in apprenticeships or have a job placement program. These schools must have associations with local unions and other metal working businesses to which they can place their students. More established schools may have a more substantial network of graduates that they can rely upon for placements. These programs can help students find employment and develop relationships within the Rex GA welding community.

Job Placement and Completion Rates. The completion rate is the portion or percentage of students that enroll in an academic program and finish it. It’s crucial that the welder school you choose has a higher completion rate. A lower rate could indicate that the students who joined the program were dissatisfied with the training, the teachers, or the facilities, and quit. The job placement rate is also an indication of the caliber of training. A high job placement rate will not only verify that the program has an excellent reputation within the field, but additionally that it has the network of Rex GA employer relationships to help students obtain employment or apprenticeships upon graduation.

Up-to-date Equipment and Facilities. Once you have narrowed down your selection of welding schools to 2 or 3 possibilities, you should consider visiting the campuses to look over their facilities. Verify that both the equipment and the facilities that you will be taught on are modern. In particular, the training equipment should be similar to what you will be using on the job. If you are uncertain what to look for, and are currently in an apprenticeship program, ask the master welder you are working under for guidance. If not, ask a local Rex GA welding contractor if they can give you some suggestions.

School Location. Although we already briefly talked about the importance of location, there are a couple of additional issues that we need to address. You should keep in mind that unless you have the ability to move, the welding program you pick must be within driving distance of your Rex GA home. If you do decide to attend an out-of-state school, in addition to relocation expenses there may be higher tuition fees for out-of-state residents. This is particularly the case for welding degree programs offered by community colleges. Furthermore, if the school provides an apprenticeship or job placement program, often their placements are within the school’s local community. So the location of the school needs to be in a region or state where you ultimately will desire to work.

Small Classes. Individualized training is essential for a manual trade such as welding. It’s possible to get lost in bigger classes and not obtain much one-on-one training. Find out what the usual class size is for the welding schools you are reviewing. Ask if you can sit in on a couple of classes so that you can witness just how much personal attention the students are receiving. While there, talk with some of the students and get their evaluations. Similarly, speak with a couple of the trainers and ask what their welding experience has been and what certifications and credentials they hold.

Flexible Class Schedules. Many people learn a new trade while still working at their present job. Verify that the class schedules for the schools you are considering are flexible enough to meet your needs. If you can only go to classes in the evenings or on weekends near Rex GA, make sure that the schools you are reviewing provide those alternatives. If you can only attend on a part-time basis, verify that the school you choose offers part-time enrollment. Also, find out what the policy is to make up classes should you miss any due to work, illness or family responsibilities.

Online Welding Certificate and Degree Programs

Welding is very much a manual type of vocation, and therefore not very compatible with online training. However, there are some online welding classes offered by specific community colleges and trade schools in the greater Rex GA area that may be credited toward a certificate or degree program. These classes mainly deal with such subjects as reading blueprints, safety,, and metallurgy. They can help give a beginner a basis to initiate their training and education. However, the most significant point is that you can’t learn how to weld or handle welding materials unless you actually do it. Obviously that can’t be performed online. These skills have to be learned in an on-campus environment or in an apprenticeship. Online or distance learning is more appropriate for experienced welders that would like to advance their expertise or possibly obtain a more advanced degree. So if you should find an online welding degree or certificate program, be very cautious and verify that the bulk of the training is done on campus or in a workshop type of setting.

Affordable Night Welding Colleges Near Me Rex GA

Choosing the right welder training program will probably be the most important decision you will make to begin your new trade. You originally stopped by our website because you had an interest in Affordable Night Welding Colleges Near Me and wanted more information on the topic Low Cost Accredited Welding Colleges Near Me. However, as we have addressed in this article, there are a number of factors that you will need to evaluate and compare between the schools you are looking at. It’s a must that any welder training that you are evaluating includes a lot of hands-on training. Classes should be small in size and every student should have their own welding machine to train with. Classroom teaching needs to provide a real-world frame of reference, and the training program should be up-to-date and conform with industry standards. Training programs vary in duration and the type of credential provided, so you will need to determine what length of program and credential will best serve your needs. Each training program offers unique options for certification also. Probably The ideal way to research your short list of schools is to go to each campus and speak with the teachers and students. Take the time to monitor some classes. Inspect the campus and facilities. Make certain that you are confident that the school you pick is the ideal one for you. With the right training, effort and commitment, the final outcome will be a new occupation as a professional welder in Rex GA.

Other Georgia Welder Locations

Rex, Georgia

Rex (also known as Hollingsworth) is an unincorporated community in Clayton County, Georgia, United States. Its elevation is 797 feet (243 m).[1] Although Rex is unincorporated, it has a post office, with the ZIP code of 30273;[2] the ZCTA for ZIP Code 30273 had a population of 11,412 at the 2000 census.[3]

 

 

Business Results 1 - 10 of 13

Martin Welding Company

3 Reviews

Metal Fabricators

Phone:

536 Edgewood Ave SE, Atlanta, GA 30312

Quality Welding Repair Services

2 Reviews

Metal Fabricators

Phone:

1588 Bogota Way, Jonesboro, GA 30236

Andrew's Ornamental Iron

2 Reviews

Metal Fabricators

Phone:

1606 A Old Atlanta Rd, Griffin, GA 30223

All Star Burglar Bars & Welding

1 Reviews

Metal Fabricators

Phone:

Atlanta, GA 30331

Silvasons Machine Shop

4 Reviews

Metal Fabricators, Machine Shops

Phone:

840 Great Sw Pkwy SW, Atlanta, GA 30336

Metal Head Welding and Fabrication

2 Reviews

Metal Fabricators

Phone:

3686 Meadowview Dr, Atlanta, GA 30122

CJ Welding and Fabricating

1 Reviews

Metal Fabricators

Phone:

1684 Atlanta Rd SE, Smyrna, GA 30080

Ricks Mobile Welding

1 Reviews

Metal Fabricators

Phone:

Jackson, GA 30233

UBI Welders

2 Reviews

Metal Fabricators

Phone:

1660 Huntingdon Tr, Atlanta, GA 30350

Eighty-Ninety Gear & Off-Road

1 Reviews

Auto Repair, Metal Fabricators

Phone:

3790 Highway 92, Ste 210, Acworth, GA 30102

 

The post Affordable Night Welding Colleges Near Me Rex GA appeared first on How to Become a Welder.