Finding the ideal welding school near Latham NY is an important first step to beginning your new career as a professional welder. But since there are a lot of schools to pick from, how do you know which ones to consider? And more importantly, once you have narrowed down your alternatives, how do you pick the right one? Many prospective students start by checking out the schools that are nearest to their homes. When they have found those that are within commuting distance, they gravitate toward the least costly one. Yes, location and the cost of tuition are necessary issues when reviewing welding technical schools, but they are not the only ones. Other concerns include such things as accreditation, reputation and job placement rates. So before starting your search for a vocational school to become a welder, it’s sensible to establish a list of qualifications that your chosen school must have. But before we explore our due diligence checklist, let’s cover a little bit about how to become a welder.

Request Free Information on Welding Schools Near You

[campusexplorer header_text=”Find Welding Schools Near You!” aos=”53237562″ concentration=”025A8616″ tracking=”WELDER-5″]

Welder Certificate and Degree Training Courses

There are multiple options available to get training as a welder in a trade or technical school. You can receive a a certificate, a diploma or an Associate Degree. Bachelor Degrees are available in Welding Technology or Welding Engineering, but are more advanced programs than most journeyman welders will need. Some programs are also offered in conjunction with an apprenticeship program. Following are brief descriptions of the most common welding programs available in the Latham NY area.

• Diploma and Certificate Programs are normally made available by trade and technical schools and take about 1 year to complete. They are more hands-on training in nature, fashioned mainly to teach welding skills. They can furnish a good foundation for a new journeyman or apprentice welder, or additional skills for experienced welders.
• Associate Degree Programs will take two years to complete and are most often offered by community colleges. An Associate Degree in Welding Technology offers a more extensive education than the certificate or diploma while still furnishing the foundation that readies students to enter the workforce.

Many states and municipalities do have licensing prerequisites for welders, so be sure to check for your location of potential employment. If needed, the welder school you pick should ready you for any licensing examinations that you will have to pass in addition to furnishing the appropriate training to become a qualified welder.

[campusexplorer header_text=”Find Welding Schools Near You!” aos=”53237562″ concentration=”025A8616″ is_lightbox=”1″ lightbox_btn_text=”Click Here to Get Free Information on Welding Schools Near You!” tracking=”WELDER-5LB”]

Welder Certification Choices

There are a number of organizations that provide welding certifications, which evaluate the skill level and knowledge of those applying. Many Latham NY employers not only expect a certificate or degree from an accredited welding school, but also certification from a renowned organization such as the American Welding Society (AWS). A wide range of certifications are offered based upon the kind of work that the welder performs. Some of the things that certification can acknowledge are the welder’s ability to

• Work in compliance with specific codes
• Work with certain metal thicknesses
• Work with various types of welds
• Operate according to contract specifications

As earlier mentioned, many states, cities or local municipalities have licensing mandates for welders. Of those calling for licensing, a number also require certification for different kinds of work. Certification is also a way to demonstrate to employers that you are an exceptionally skilled and experienced welder. So just as with licensing, check the requirements for your local area and confirm that the welder vocational school you decide on prepares you for certification if needed.

Topics to Ask Welding Vocational Programs

After you have chosen the credential you want to earn, a certificate, diploma or degree, you can start to assess schools. As you are no doubt aware, there are many welding vocational and trade schools in the Latham NY area. That’s why it’s essential to decide up front what qualifications your selected school must have. We have previously covered 2 significant ones that many people look at first, which are location and the cost of tuition. As mentioned, although they are essential qualifiers, they are not the only ones that must be looked at. After all, the program you pick is going to provide the education that will be the foundation of your new career as a welder. So following are more factors you may want to evaluate before picking a welding vocational school.

Accreditation. It’s essential that the welder technical school you choose is accredited by either a regional or a national agency. There are two standard kinds of accreditation. The school may receive Institutional Accreditation based on all of their programs. Programmatic Accreditation is based on a single program the school has, such as Welding Technology. So make sure that the program you select is accredited, not just the school itself. Also, the accreditation should be by a U.S. Department of Education recognized accrediting organization, such as the Accrediting Commission of Career Schools and Colleges of Technology (ACCSCT). In addition to helping make sure that you get an excellent education, the accreditation can also assist in getting financial assistance or student loans, which are frequently not available in Latham NY for schools that are not accredited. Finally, for those states or municipalities that require licensing, they may require that the welder training program be accredited also.

Job Placement and Apprenticeship Programs. Numerous welder degree or certificate programs are provided combined with an apprenticeship program. Some other schools will assist in placing you in a job or an apprenticeship after graduation. Find out if the schools you are reviewing assist in placing students in apprenticeships or have a job assistance program. These schools must have associations with local unions and various metal working businesses to which they can refer their students. Older schools may have a larger network of graduates that they can utilize for placements. These programs can assist students in finding employment and establish associations within the Latham NY welding community.

Job Placement and Completion Rates. The completion rate is the portion or percentage of students that start an educational program and complete it. It’s important that the welding program you choose has a higher completion rate. A lower rate might signify that the students who joined the program were unhappy with the training, the instructors, or the facilities, and quit. The job placement rate is also a good indicator of the caliber of training. A high job placement rate will not only verify that the program has an excellent reputation within the industry, but additionally that it has the network of Latham NY employer relationships to assist students secure employment or apprenticeships upon graduation.

Modern Facilities and Equipment. After you have decreased your selection of welding programs to two or three possibilities, you should consider going to the campuses to inspect their facilities. Make sure that both the facilities and the equipment that you will be instructed on are modern. Specifically, the training equipment should be similar to what you will be working with on the job. If you are uncertain what to look for, and are currently in an apprenticeship program, ask the master welder you are working under for guidance. Otherwise, ask a local Latham NY welding professional if they can give you some suggestions.

School Location. Even though we previously briefly discussed the significance of location, there are a few additional issues that we should cover. You should keep in mind that unless you have the ability to relocate, the welding program you pick must be within driving distance of your Latham NY home. If you do decide to attend an out-of-state school, in addition to moving expenses there may be higher tuition fees for out-of-state residents. This is particularly the case for welding certificate programs offered by community colleges. Furthermore, if the school offers a job placement or apprenticeship program, most likely their placements are within the school’s local community. So the location of the school needs to be in an area or state where you ultimately will wish to work.

Smaller Classes. One-on-one training is essential for a manual trade such as welding. It’s possible to get lost in larger classes and not receive much individualized instruction. Find out what the typical class size is for the welding schools you are looking at. Ask if you can attend a few classes so that you can observe how much individual attention the students are getting. While there, speak with several of the students and get their opinions. Also, speak with a few of the instructors and find out what their welding experience has been and what certifications and credentials they hold.

Flexible Class Scheduling. Lots of folks learn a new profession while still employed at their current job. Check to see that the class schedules for the programs you are looking at are flexible enough to satisfy your needs. If you can only attend classes at night or on weekends near Latham NY, make sure that the schools you are assessing offer those choices. If you can only attend part-time, verify that the school you pick offers part-time enrollment. Also, ask what the protocol is to make up classes should you miss any because of work, sickness or family emergencies.

Online Welder Training Programs

Welding is very much a manual type of profession, and therefore not very suitable for online training. Even so, there are a few online welding courses offered by certain community colleges and vocational schools in the greater Latham NY area that can count toward a certificate or degree program. These classes primarily cover such subjects as reading blueprints, safety,, and metallurgy. They can help provide a novice a basis to initiate their training and education. Nevertheless, the most important point is that you can’t learn how to weld or handle welding materials until you actually do it. Obviously that can’t be done online. These skills have to be learned in an on-campus environment or in an apprenticeship. Online or distance learning is more appropriate for seasoned welders that want to advance their expertise or perhaps obtain a more advanced degree. So if you should come across an online welding degree or certificate program, be extremely careful and confirm that the larger part of the training is done on campus or in a workshop type of setting.

Top Local Trade Schools for Welders Near Me Latham NY

Choosing the right welding school will probably be the most important decision you will make to start your new career. You originally stopped by our website because you had an interest in Top Local Trade Schools for Welders Near Me and wanted more information on the topic Top Night Trade Schools for Welders Near Me. However, as we have discussed in this article, there are several factors that you will need to assess and compare among the schools you are looking at. It’s a must that any welding training that you are considering includes a good deal of hands-on instruction. Classes need to be smaller in size and each student must have their own welding machine to train with. Classroom teaching should provide a real-world perspective, and the curriculum should be up-to-date and in-line with industry standards. Programs differ in duration and the kind of credential provided, so you will have to determine what length of program and certificate or degree will best serve your needs. Each training program provides unique options for certification also. Probably The ideal means to research your short list of schools is to go to each campus and speak with the students and faculty. Invest some time to sit in on some classes. Inspect the campus and facilities. Make certain that you are confident that the program you decide on is the right one for you. With the right training, effort and commitment, the end outcome will be a new occupation as a professional welder in Latham NY.

Other New York Welder Locations

Latham, New York

Latham is a hamlet in Albany County, New York, United States. It is located along U.S. Route 9 in the town of Colonie, a dense suburb north of Albany. As of the 2010 census, the population was 20,736.

The area was known at different times in its history as Yearsley's (c. 1829), Van Vranken's (c. 1851), Town House Corners (c. 1860) and Latham's Corners, named after hotel owner William G. Latham. The "corner" referred to is now the intersection of Troy-Schenectady Road (NY Route 2) and Old Loudon Road.

Before European expansion to North America, Latham was occupied by Mohicans.[3] The Old Loudon Road was built in 1755 during the French and Indian War to bring troops and provisions from Albany to the areas of Lake George and Ticonderoga.[citation needed] The Troy and Schenectady Turnpike was built in 1802 and intersected Old Loudon. An early first resident of this hamlet was Jonas Yearsley, 1785, who later built the first hotel close to this intersection. The hamlet was known first under the name of Yearsley's Corners and years afterward as Van Vrankens Corners in the 1850s. The name changed into Latham when William Latham became owner of the hotel. James, his son, continued to run the hotel until he died on August 14, 1933.

 

 

Business Results 1 - 10 of 2

Govel Welding

4 Reviews

Metal Fabricators

Phone:

1932 Central Ave, Albany, NY 12205

Hi-Test Garage

2 Reviews

Auto Parts & Supplies, Auto Repair, Auto Customization

Phone:

558 Third St, Albany, NY 12206

 

The post Top Local Trade Schools for Welders Near Me Latham NY appeared first on How to Become a Welder.