Locating the ideal welder school near Lakeland GA is an important first step to launching your new career as a professional welder. But since there are numerous schools to select from, how do you know which ones to consider? And more significantly, once you have narrowed down your choices, how do you pick the right one? Most people start by checking out the schools that are closest to their residences. When they have located those that are within commuting distance, they gravitate toward the least costly one. Yes, location and tuition cost are necessary considerations when reviewing welding trade schools, but they are not the only ones. Other considerations include such things as reputation, accreditation and job placement rates. So before starting your search for a vocational school to become a welder, it’s sensible to create a list of qualifications that your chosen school must have. But before we delve into our due diligence checklist, let’s cover a little bit about how to become a welder.

Request Free Information on Welding Schools Near You

[campusexplorer header_text=”Find Welding Schools Near You!” aos=”53237562″ concentration=”025A8616″ tracking=”WELDER-5″]

Welder Certificate and Degree Training Classes

There are multiple options to get training as a welder in a trade or vocational school. You can receive a a certificate, a diploma or an Associate Degree. Bachelor Degrees are available in Welding Technology or Welding Engineering, but are more advanced programs than most journeyman welders will need. Some programs are also made available in conjunction with an apprenticeship program. Below are short explanations of the most common welding programs offered in the Lakeland GA area.

• Diploma and Certificate Programs are usually offered by trade and technical schools and take about one year to complete. They are more hands-on training in scope, created mainly to teach welding skills. They can provide a good foundation for a new journeyman or apprentice welder, or additional skills for experienced welders.
• Associate Degree Programs will take two years to finish and are usually offered by community colleges. An Associate Degree in Welding Technology provides a more well-rounded education than the diploma or certificate while still providing the foundation that readies students to enter the workforce.

Many states and municipalities do have licensing prerequisites for welders, therefore don’t forget to check for your location of potential employment. If needed, the welding school you select should prep you for any licensing examinations that you will have to take in addition to furnishing the appropriate training to become a qualified welder.

[campusexplorer header_text=”Find Welding Schools Near You!” aos=”53237562″ concentration=”025A8616″ is_lightbox=”1″ lightbox_btn_text=”Click Here to Get Free Information on Welding Schools Near You!” tracking=”WELDER-5LB”]

Welding Certification Options

There are several organizations that provide welding certifications, which evaluate the knowledge and skill level of those applying. Numerous Lakeland GA employers not only demand a certificate or degree from an accredited welding school, but also certification from a respected agency like the American Welding Society (AWS). A wide range of certifications are available based upon the kind of work that the welder performs. Some of the things that certification can acknowledge are the welder’s ability to

• Operate in compliance with specific codes
• Work with specific metal thicknesses
• Work with various kinds of welds
• Operate according to contract specifications

As already stated, many states, cities or local municipalities have licensing requirements for welders. Of those mandating licensing, some also require certification for different types of work. Certification is also a way to prove to employers that you are an extremely skilled and qualified welder. So similarly as with licensing, check the requirements for your local area and confirm that the welder tech school you decide on prepares you for certification as needed.

Points to Ask Welding Trade Schools

After you have decided on the credential you want to attain, a degree, certificate or diploma, you can start to compare schools. As you are no doubt aware, there are numerous welding vocational and trade schools in the Lakeland GA area. That’s why it’s necessary to establish in advance what qualifications your chosen school must have. We have already discussed a couple of significant ones that most people look at first, which are location and the cost of tuition. As mentioned, although they are very important qualifications, they are not the only ones that need to be looked at. After all, the school you decide on is going to provide the education that will be the foundation of your new career as a welder. So below are some additional factors you might want to evaluate before picking a welder trade school.

Accreditation. It’s very important that the welding vocational school you choose is accredited by either a national or a regional organization. There are 2 standard types of accreditation. The school may attain Institutional Accreditation based on all of their programs. Programmatic Accreditation is based on a single program the school offers, for instance Welding Technology. So confirm that the program you choose is accredited, not just the school alone. Additionally, the accreditation should be by a U.S. Department of Education recognized accrediting organization, for example the Accrediting Commission of Career Schools and Colleges of Technology (ACCSCT). Besides helping make sure that you receive an excellent education, the accreditation can also help in getting financial aid or student loans, which are in many cases not offered in Lakeland GA for schools that are not accredited. Also, for those states or municipalities that mandate licensing, they may require that the welder training program be accredited as well.

Apprenticeship and Job Placement Programs. Numerous welding degree or certificate programs are offered in conjunction with an apprenticeship program. Some other schools will assist in placing you in a job or an apprenticeship after graduation. Find out if the schools you are reviewing assist in placing students in apprenticeships or have a job placement program. The schools should have associations with local unions and various metal working businesses to which they can refer their students. More established schools may have a larger network of graduates that they can rely upon for referrals. These programs can assist students in finding employment and establish relationships within the Lakeland GA welding community.

Job Placement and Completion Rates. The completion rate is the percentage of students that enroll in an instructional program and finish it. It’s important that the welding school you pick has a higher completion rate. A reduced rate might signify that the students who were in the program were dissatisfied with the training, the teachers, or the facilities, and dropped out. The job placement rate is also a good indicator of the caliber of training. A high job placement rate will not only confirm that the school has a good reputation within the field, but also that it has the network of Lakeland GA employer relationships to assist students secure apprenticeships or employment after graduation.

Modern Equipment and Facilities. Once you have decreased your choice of welder schools to two or three options, you should think out going to the campuses to evaluate their facilities. Make sure that both the facilities and the equipment that you will be instructed on are up-to-date. Specifically, the training equipment should be comparable to what you will be using on the job. If you are uncertain what to look for, and are already in an apprenticeship program, ask the master welder you are working under for guidance. If not, ask a local Lakeland GA welding professional if they can give you some tips.

School Location. Although we previously briefly discussed the importance of location, there are a few additional points that we need to address. You should bear in mind that unless you are able to relocate, the welder school you choose needs to be within commuting distance of your Lakeland GA home. If you do opt to enroll in an out-of-state school, in addition to relocation costs there may be higher tuition fees for out-of-state residents. This is particularly true for welder diploma programs offered by community colleges. Additionally, if the school offers an apprenticeship or job placement program, more than likely their placements are within the school’s local community. So the location of the school should be in a region or state where you ultimately will wish to work.

Small Classes. One-on-one instruction is essential for a hands-on trade such as welding. It’s easy to get overlooked in bigger classes and not obtain much personalized training. Ask what the usual class size is for the welding schools you are considering. Ask if you can sit in on some classes so that you can see just how much individual attention the students are getting. While there, talk with several of the students and get their evaluations. Also, speak with a couple of the teachers and ask what their welding experience has been and what credentials and certifications they have earned.

Convenient Class Scheduling. Many people learn a new trade while still employed at their present job. Confirm that the class schedules for the schools you are reviewing are flexible enough to satisfy your needs. If you can only go to classes in the evenings or on weekends near Lakeland GA, verify that the schools you are looking at offer those alternatives. If you can only enroll part-time, make sure that the school you choose offers part-time enrollment. Also, ask what the policy is to make up classes if you you miss any because of work, sickness or family responsibilities.

Online Welder Training

Welding is truly a hands-on kind of vocation, and therefore not very compatible with training online. However, there are a few online welding classes offered by certain community colleges and technical schools in the greater Lakeland GA area that can be credited toward a degree or certificate program. These classes primarily deal with such subjects as reading blueprints, safety,, and metallurgy. They can help give a beginner a basis to initiate their education and training. Nevertheless, the most critical point is that you can’t learn how to weld or handle welding materials until you actually do it. Clearly that can’t be performed online. These skills have to be learned in an on-campus environment or in an apprenticeship. Online or distance learning is better suited for seasoned welders that want to advance their knowledge or perhaps earn a more advanced degree. So if you should find an online welding degree or certificate program, be very cautious and make sure that the larger part of the training is done on campus or in a workshop type of environment.

Affordable Fast Track Welding Schools Lakeland GA

Picking the ideal welder school will undoubtedly be the most critical decision you will make to launch your new career. You originally stopped by our website because you had an interest in Affordable Fast Track Welding Schools and wanted more information on the topic Affordable Evening Welding Schools. However, as we have covered in this article, there are a number of factors that you will need to assess and compare among the programs you are reviewing. It’s a necessity that any welding school that you are evaluating includes a considerable amount of hands-on instruction. Classes should be small in size and every student must have their personal welding machine to train on. Classroom teaching should offer a real-world perspective, and the training program should be current and conform with industry standards. Training programs differ in length and the kind of credential provided, so you will need to determine what length of program and degree or certificate will best satisfy your needs. Each program offers unique possibilities for certification also. Probably the best way to research your short list of schools is to visit each campus and speak with the faculty and students. Take the time to attend a few classes. Inspect the campus and facilities. Make sure that you are confident that the training program you pick is the right one for you. With the proper training, effort and commitment, the end result will be a new trade as a professional welder in Lakeland GA.

Other Georgia Welder Locations

Lakeland, Georgia

Lakeland is a city in Lanier County, Georgia, United States. The city is the county seat of Lanier County.[4] It is part of the Valdosta, Georgia Metropolitan Statistical Area. The population was 2,730 at the 2000 census.

Originally called Alapaha and then Milltown or Mill Town, Lakeland received its current name in 1925 in honor of its proximity to Grand Bay Lake, Lake Irma, and Banks Lake.[5] For many years, Lakeland owned and operated its own railroad.

Numerous festivals are held in the county throughout each year, one of which is the Flatlanders Frolic Arts and Crafts Show. This event features bluegrass music, a road race and various other Labor Day weekend events. Also held in Lanier County is the Living Murals Celebration, held in the spring, and most recently the Georgia Deep Woods Deerfest, a festival featuring wild game suppers and firearms giveaways.

 

 

Business Results 1 - 10 of 1

Southern Pole Barn Company

1 Reviews

Contractors, Metal Fabricators

Phone:

511 W Colquitt St, Sparks, GA 31647

 

The post Affordable Fast Track Welding Schools Lakeland GA appeared first on How to Become a Welder.