Choosing the right welder school near Kent WA is an important first step to starting your new career as a professional welder. But since there are so many schools to select from, how do you determine which ones to consider? And more notably, once you have narrowed down your alternatives, how do you pick the best one? A number of people begin by reviewing the schools that are nearest to their homes. Once they have identified those that are within driving distance, they are drawn toward the cheapest one. Yes, location and tuition cost are crucial concerns when reviewing welder vocational schools, but they are not the only ones. Other considerations include such things as reputation, accreditation and job placement rates. So before beginning your search for a vocational school to become a welder, it’s wise to establish a list of qualifications that your chosen school must have. But before we examine our due diligence checklist, let’s cover a little bit about how to become a welder.

Request Free Information on Welding Schools Near You

[campusexplorer header_text=”Find Welding Schools Near You!” aos=”53237562″ concentration=”025A8616″ tracking=”WELDER-5″]

Welder Certificate and Degree Programs

There are several alternatives available to receive training as a welder in a technical or trade school. You can earn a diploma, a certificate or an Associate Degree. Bachelor Degrees are offered in Welding Engineering or Welding Technology, but are more advanced degrees than most journeyman welders will need. Some programs are also made available combined with an apprenticeship program. Following are short explanations of the most common welding programs available in the Kent WA area.

• Diploma and Certificate Programs are normally offered by trade and technical schools and take about one year to complete. They are more hands-on training in scope, created largely to teach welding skills. They can provide a good foundation for a new journeyman or apprentice welder, or specialized skills for experienced welders.
• Associate Degree Programs will take two years to complete and are usually offered by community colleges. An Associate Degree in Welding Technology furnishes a more well-rounded education than the diploma or certificate while still furnishing the foundation that readies students to enter the workforce.

Many municipalities and states do have licensing prerequisites for welders, therefore be sure to check for your location of potential employment. If required, the welding school you select should prep you for any licensing examinations that you will need to take in addition to furnishing the proper training to become a professional welder.

[campusexplorer header_text=”Find Welding Schools Near You!” aos=”53237562″ concentration=”025A8616″ is_lightbox=”1″ lightbox_btn_text=”Click Here to Get Free Information on Welding Schools Near You!” tracking=”WELDER-5LB”]

Welding Certification Choices

There are multiple institutions that offer welding certifications, which assess the skill level and knowledge of those applying. Many Kent WA employers not only require a degree or certificate from an accredited welding school, but also certification from a renowned organization such as the American Welding Society (AWS). Different certifications are available based upon the type of work that the welder performs. Just some of the skills that certification can attest to are the welder’s ability to

• Work in compliance with specific codes
• Work with specified metal thicknesses
• Work with specific kinds of welds
• Perform in compliance with contract specifications

As formerly stated, many cities, states or local municipalities have licensing mandates for welders. Of those calling for licensing, some also require certification for various types of work. Certification is also a way to demonstrate to employers that you are a highly skilled and qualified welder. So just as with licensing, check the requirements for your location and make sure that the welding vocational school you select prepares you for certification as needed.

Subjects to Ask Welder Tech Programs

Once you have chosen the credential you want to attain, a certificate, diploma or degree, you can begin to evaluate schools. As you probably know, there are many welder trade and vocational schools in the Kent WA area. That’s why it’s necessary to establish in advance what qualifications your school of choice must have. We have already discussed 2 important ones that many people look at first, which are location and the cost of tuition. As stated, although they are essential qualifiers, they are not the only ones that need to be looked at. After all, the program you decide on is going to furnish the training that will be the foundation of your new profession as a welder. So below are some additional factors you may need to evaluate before choosing a welder trade school.

Accreditation. It’s extremely important that the welder vocational school you choose is accredited by either a national or a regional agency. There are two basic types of accreditation. The school may attain Institutional Accreditation based on all of their programs. Programmatic Accreditation is based on a single program the school offers, for example Welding Technology. So verify that the program you select is accredited, not just the school alone. Additionally, the accreditation should be by a U.S. Department of Education acknowledged accrediting organization, for example the Accrediting Commission of Career Schools and Colleges of Technology (ACCSCT). Besides helping ensure that you obtain a quality education, the accreditation may also assist in getting financial assistance or student loans, which are often unavailable in Kent WA for schools that are not accredited. Also, for those states or municipalities that mandate licensing, they may require that the welding training program be accredited as well.

Job Assistance and Apprenticeship Programs. Many welding certificate or degree programs are offered combined with an apprenticeship program. Various other schools will assist in placing you in an apprenticeship or a job upon graduation. Ask if the schools you are looking at help in placing students in apprenticeships or have a job assistance program. The schools must have relationships with local unions and various metal working businesses to which they can place their students. More established schools may have a larger network of graduates that they can rely upon for referrals. These programs can assist students in finding employment and develop relationships within the Kent WA welding community.

Job Placement and Completion Rates. The completion rate is the percentage of students that begin an academic program and finish it. It’s essential that the welder program you select has a high completion rate. A lower rate could indicate that the students who enrolled in the program were dissatisfied with the training, the instructors, or the facilities, and quit. The job placement rate is also an indication of the quality of training. A high job placement rate will not only confirm that the program has an excellent reputation within the industry, but additionally that it has the network of Kent WA contacts to assist students obtain apprenticeships or employment after graduation.

Modern Facilities and Equipment. After you have limited your selection of welding programs to two or three options, you should think out visiting the campuses to look over their facilities. Make sure that both the equipment and the facilities that you will be taught on are up-to-date. In particular, the training equipment should be similar to what you will be using on the job. If you are uncertain what to look for, and are already in an apprenticeship program, consult with the master welder you are working under for guidance. If not, ask a local Kent WA welding contractor if they can give you some pointers.

School Location. Even though we previously briefly talked about the importance of location, there are a couple of additional points that we need to address. You should keep in mind that unless you can relocate, the welding program you choose must be within commuting distance of your Kent WA home. If you do opt to attend an out-of-state school, in addition to relocation expenses there might be higher tuition fees for out-of-state residents. This is particularly the case for welding certificate programs offered by community colleges. Additionally, if the school provides a job placement or apprenticeship program, more than likely their placements are within the school’s local community. So the location of the school should be in a region or state where you ultimately will wish to work.

Smaller Classes. One-on-one instruction is essential for a hands-on trade such as welding. It’s possible to get lost in bigger classes and not get much one-on-one training. Ask what the usual class size is for the welder programs you are reviewing. Inquire if you can sit in on a few classes so that you can experience how much individual attention the students are getting. While there, speak with several of the students and get their evaluations. Also, chat with a couple of the instructors and ask what their welding experience has been and what certifications and credentials they hold.

Flexible Class Schedules. Many people learn a new profession while still working at their current job. Make sure that the class schedules for the programs you are looking at are flexible enough to satisfy your needs. If you can only go to classes at night or on weekends near Kent WA, confirm that the schools you are assessing offer those choices. If you can only enroll part-time, make sure that the school you pick offers part-time enrollment. Also, find out what the protocol is to make up classes should you miss any due to illness, work or family emergencies.

Online Welding Training Programs

Welding is very much a hands-on type of vocation, and for that reason not very suitable for online training. However, there are some online welding courses offered by specific community colleges and vocational schools in the greater Kent WA area that can count toward a certificate or degree program. These classes mainly deal with such subjects as safety, reading blueprints, and metallurgy. They can help give a novice a foundation to start their education and training. However, the most significant point is that you can’t learn how to weld or work with welding materials until you actually do it. Clearly that can’t be accomplished online. These skills must be learned in an on-campus environment or in an apprenticeship. Online or distance learning is better suited for seasoned welders that desire to advance their expertise or perhaps earn a more advanced degree. So if you should discover an online welding degree or certificate program, be very cautious and make certain that the larger part of the training is done on campus or in a workshop type of setting.

Stainless Steel Welding Course Kent WA

Picking the ideal welding school will undoubtedly be the most critical decision you will make to start your new trade. You originally stopped by our website because you had an interest in Stainless Steel Welding Course and wanted more information on the topic Where to Find Accredited Welding Colleges. However, as we have covered in this article, there are many factors that you will need to examine and compare between the programs you are reviewing. It’s a must that any welding training program that you are evaluating includes a good deal of hands-on training. Classes need to be small in size and each student must have their personal welding machine to train with. Classroom instruction needs to provide a real-world context, and the course of study should be current and in-line with industry standards. Training programs vary in length and the type of credential offered, so you will have to determine what length of program and certificate or degree will best fulfill your needs. Each program offers different possibilities for certification as well. Probably The ideal approach to research your short list of schools is to visit each campus and speak with the faculty and students. Invest some time to monitor a few classes. Inspect the campus and facilities. Make certain that you are confident that the school you choose is the ideal one for you. With the right training, hard work and commitment, the end result will be a new occupation as a professional welder in Kent WA.

Other Washington Welder Locations

Kent, Washington

Kent is a city located in King County, Washington, United States. It is the sixth largest city in the state. Kent is in the heart of the Seattle–Tacoma metropolitan area, located 19 miles south of Seattle and 19 miles northeast of Tacoma. Incorporated in 1890, it is the second oldest incorporated city in King County, after Seattle.[5] Kent's population as of April 2010 was 92,411 according to the 2010 census. The total grew to an estimated 129,618 as of July 1, 2018,[6] owing primarily to annexation.

The Kent area was first permanently settled by European Americans in the early to mid-1850's along the banks of what was then the White River. The first settler was Samuel Russell, who sailed the White and Duamish rivers until he claimed a plot of land southeast of modern-day downtown Kent in the spring of 1853. Russell was followed by several other settlers who quickly staked claims in the area.[7] The settlements were originally known as "White River" and later the town was called "Titusville" after an early settler by the name of James Henry Titus.[8] (There is still a "Titusville Station" sign on Gowe Street near First Avenue). In 1861 a post office was established under the name White River and was located at the farm of David and Irena Neely who settled in modern-day Kent in 1854. In 1855 their farm was attacked by Native Americans when David Neely served as a lieutenant in the Territorial Army. By 1870 the population was 277 and all of the quality bottom-land had been claimed.[9]

Throughout the 1860s and 70's, grain and forage crops such as wheat, barley, oats, hay, and timothy accounted for much of the annual return of farmers in the valley. During the late 1870s the town discovered hops production as a major source of income.[10] Due to an aphid invasion which affected hops crops in Europe,[11] hops from the Puget Sound area began to command high prices. Hops were shipped from Titusville either by the river or via rail. In 1889 the town was renamed for the County of Kent, the major hops-producing region in England. Hops production in the White River valley came to an end soon after its own invasion of aphids in 1891.[12]

 

 

Business Results 1 - 10 of 19

AAA Welding Company

2 Reviews

Metal Fabricators

Phone:

22610 85th Pl S, Kent, WA 98031

Service Welding & Machine

1 Reviews

Metal Fabricators

Phone:

1435 S Jackson St, Seattle, WA 98144

Laser Cutting Northwest

1 Reviews

Metal Fabricators

Phone:

3205 C St NE, Auburn, WA 98002

Mann's Welding & Trailer Hitch

32 Reviews

Auto Parts & Supplies, Trailer Repair, Metal Fabricators

Phone:

16535 Aurora Ave N, Seattle, WA 98133

AC Custom Metal Work

7 Reviews

Fences & Gates, Metal Fabricators

Phone:

21845 SE 272nd St, Maple Valley, WA 98038

Kollmar Sheet Metal

2 Reviews

Metal Fabricators

Phone:

941 S Nebraska St, Seattle, WA 98108

Ballard Sheet Metal Works

13 Reviews

Metal Fabricators

Phone:

4763 Ballard Ave NW, Seattle, WA 98107

Praxair

2 Reviews

Metal Fabricators

Phone:

545 S Lander St, Seattle, WA 98134

Knoy Metal Works

8 Reviews

Metal Fabricators, Fences & Gates, Decks & Railing

Phone:

Seattle, WA 98155

Pacific Welding Supplies

1 Reviews

Metal Fabricators

Phone:

2902 S M St, Tacoma, WA 98409

 

The post Stainless Steel Welding Course Kent WA appeared first on How to Become a Welder.