Locating the right welder technical school near Decatur GA is an important first step to starting your new occupation as a professional welder. But since there are a lot of schools to select from, how do you know which ones to consider? And more notably, once you have narrowed down your options, how do you select the right one? Most prospective students begin by checking out the schools that are nearest to their residences. Once they have located those that are within commuting distance, they are drawn toward the cheapest one. Yes, location and tuition cost are crucial issues when reviewing welder trade schools, but they are not the only ones. Other concerns include such things as reputation, accreditation and job placement rates. So before starting your search for a trade school to become a welder, it’s wise to develop a list of qualifications that your selected school must have. But before we examine our due diligence checklist, let’s talk a little bit about how to become a welder.

Request Free Information on Welding Schools Near You

[campusexplorer header_text=”Find Welding Schools Near You!” aos=”53237562″ concentration=”025A8616″ tracking=”WELDER-5″]

Welder Certificate and Degree Training Programs

There are multiple options to get training as a welder in a technical or trade school. You can receive a a certificate, a diploma or an Associate Degree. Bachelor Degrees are offered in Welding Engineering or Welding Technology, but are more advanced courses than most journeyman welders will need. Some programs are also offered along with an apprenticeship program. Below are short summaries of the most typical welding programs offered in the Decatur GA area.

• Certificate and Diploma Programs are usually made available by technical and trade schools and take about 1 year to finish. They are more hands-on training in nature, created mainly to teach welding skills. They can furnish a good foundation for a new journeyman or apprentice welder, or supplemental skills for working welders.
• Associate Degree Programs will take 2 years to complete and are usually offered by community colleges. An Associate Degree in Welding Technology provides a more extensive education than the certificate or diploma while still furnishing the foundation that prepares students to enter the workforce.

A number of states and municipalities do have licensing requirements for welders, so be sure to check for your location of potential employment. If required, the welding school you select should ready you for any licensing exams that you will need to pass in addition to providing the proper training to become a qualified welder.

[campusexplorer header_text=”Find Welding Schools Near You!” aos=”53237562″ concentration=”025A8616″ is_lightbox=”1″ lightbox_btn_text=”Click Here to Get Free Information on Welding Schools Near You!” tracking=”WELDER-5LB”]

Welding Certification Choices

There are several institutions that provide welder certifications, which evaluate the knowledge and skill level of those applying. A large number of Decatur GA employers not only expect a degree or certificate from an accredited welding school, but also certification from a highly regarded organization such as the American Welding Society (AWS). A variety of certifications are available based on the type of work that the welder does. A few of the things that certification can acknowledge are the welder’s ability to

• Work in compliance with specific codes
• Work with specified metal thicknesses
• Work with specific types of welds
• Operate based on contract specifications

As previously stated, many states, cities or local municipalities have licensing mandates for welders. Of those calling for licensing, some also require certification for various kinds of work. Certification is also a way to prove to employers that you are an exceptionally skilled and experienced welder. So just as with licensing, check the requirements for your location and make sure that the welding trade school you decide on prepares you for certification as needed.

Topics to Ask Welder Technical Programs

As soon as you have decided on the credential you would like to earn, a certificate, diploma or degree, you can begin to compare schools. As you probably know, there are a large number of welding trade and technical schools in the Decatur GA area. That’s why it’s important to determine up front what qualifications your school of choice must have. We have already covered two important ones that many people look at first, which are location and the cost of tuition. As stated, although they are very important qualifications, they are not the only ones that need to be considered. After all, the program you select is going to provide the training that will be the foundation of your new vocation as a welder. So following are more factors you might need to consider before picking a welder vocational school.

Accreditation. It’s very important that the welder technical school you pick is accredited by either a regional or a national organization. There are two basic kinds of accreditation. The school may earn Institutional Accreditation based on all of their programs. Programmatic Accreditation is based on a single program the school offers, such as Welding Technology. So verify that the program you select is accredited, not just the school itself. Also, the accreditation should be by a U.S. Department of Education acknowledged accrediting organization, for example the Accrediting Commission of Career Schools and Colleges of Technology (ACCSCT). In addition to helping make sure that you receive an excellent education, the accreditation can also assist in obtaining financial assistance or student loans, which are in many cases not available in Decatur GA for schools that are not accredited. Also, for those states or municipalities that mandate licensing, they may require that the welder training program be accredited as well.

Job Assistance and Apprenticeship Programs. A large number of welding diploma or degree programs are offered in conjunction with an apprenticeship program. Other schools will help place you in a job or an apprenticeship after graduation. Ask if the schools you are looking at assist in placing students in apprenticeships or have a job placement program. The schools should have partnerships with local unions and other metal working businesses to which they can place their students. More established schools may have a larger network of graduates that they can utilize for referrals. These programs can assist students in finding employment and develop relationships within the Decatur GA welding community.

Job Placement and Completion Rates. The completion rate is the percentage of students that enroll in an instructional program and finish it. It’s important that the welder program you pick has a higher completion rate. A reduced rate could signify that the students who were in the program were dissatisfied with the training, the instructors, or the facilities, and quit. The job placement rate is also an indication of the caliber of training. A high job placement rate will not only affirm that the school has a good reputation within the industry, but additionally that it has the network of Decatur GA employer relationships to assist students obtain apprenticeships or employment after graduation.

Up-to-date Equipment and Facilities. Once you have narrowed down your selection of welding programs to 2 or 3 possibilities, you should consider visiting the campuses to look over their facilities. Confirm that both the equipment and the facilities that you will be instructed on are up-to-date. In particular, the training equipment should be comparable to what you will be working with on the job. If you are uncertain what to look for, and are already in an apprenticeship program, ask the master welder you are working under for guidance. Otherwise, ask a local Decatur GA welding professional if they can give you a few suggestions.

School Location. Even though we previously briefly talked about the significance of location, there are a couple of additional points that we need to address. You should keep in mind that unless you can relocate, the welder school you select needs to be within commuting distance of your Decatur GA home. If you do decide to attend an out-of-state school, apart from relocation costs there may be higher tuition fees for out-of-state residents. This is particularly true for welding degree programs offered by community colleges. Also, if the school offers an apprenticeship or job placement program, most likely their placements are within the school’s regional community. So the location of the school needs to be in an area or state where you ultimately will wish to work.

Smaller Classes. Individualized training is essential for a manual trade such as welding. It’s easy to get lost in larger classes and not obtain much individualized instruction. Find out what the average class size is for the welding schools you are reviewing. Ask if you can sit in on a few classes so that you can witness how much individual attention the students are receiving. While there, talk with several of the students and get their opinions. Similarly, chat with a few of the teachers and find out what their welding experience has been and what certifications and credentials they hold.

Flexible Class Schedules. Lots of folks learn a new trade while still working at their current job. Confirm that the class schedules for the programs you are considering are convenient enough to fulfill your needs. If you can only attend classes in the evenings or on weekends near Decatur GA, verify that the schools you are reviewing provide those choices. If you can only enroll on a part-time basis, verify that the school you choose offers part-time enrollment. Also, ask what the protocol is to make up classes if you you miss any because of illness, work or family responsibilities.

Online Welding Classes

Welding is truly a hands-on type of vocation, and therefore not extremely compatible with online training. Having said that, there are a few online welding programs offered by certain community colleges and technical schools in the greater Decatur GA area that can be credited toward a certificate or degree program. These courses primarily deal with such subjects as reading blueprints, safety,, and metallurgy. They can help give a novice a foundation to start their training and education. Nevertheless, the most important point is that you can’t learn how to weld or use welding materials until you actually do it. Obviously that can’t be done online. These skills must be learned in an on-campus setting or in an apprenticeship. Online or distance learning is better suited for seasoned welders that desire to advance their expertise or perhaps attain a more advanced degree. So if you should find an online welding degree or certificate program, be very cautious and verify that the greater part of the training is done on campus or in a workshop type of setting.

Free Info on Evening Welding Training Near Me Decatur GA

Picking the best welder training program will probably be the most important decision you will make to begin your new trade. You originally stopped by our website because you had an interest in Free Info on Evening Welding Training Near Me and wanted more information on the topic Affordable Online Welding Training Near Me. However, as we have addressed in this article, there are many factors that you will need to evaluate and compare between the schools you are reviewing. It’s a must that any welding school that you are assessing includes a good deal of hands-on training. Classes need to be small in size and every student must have their personal welding machine to train with. Classroom instruction needs to offer a real-world perspective, and the curriculum should be up-to-date and in-line with industry standards. Training programs vary in length and the type of credential offered, so you will need to decide what length of program and certificate or degree will best satisfy your needs. Each training program provides unique options for certification as well. Probably the best approach to research your short list of schools is to go to each campus and speak with the students and faculty. Invest some time to sit in on a few classes. Tour the campus and facilities. Make certain that you are confident that the school you decide on is the ideal one for you. With the proper training, effort and dedication, the final result will be a new career as a professional welder in Decatur GA.

Other Georgia Welder Locations

Decatur, Georgia

Decatur is a city in, and the county seat of, DeKalb County, Georgia, which is part of the Atlanta metropolitan area. With a population of 20,148 in the 2013 census,[3] the municipality is sometimes assumed to be larger since multiple ZIP Codes in unincorporated DeKalb County bear Decatur as the address. The city is served by three MARTA rail stations (Decatur, East Lake, and Avondale). The city is located approximately 5 miles northeast of downtown Atlanta and shares its western border with both the city of Atlanta (the Kirkwood neighborhood) and unincorporated DeKalb County. The Druid Hills neighborhood is to the northwest of Decatur.

Decatur was established at the intersection of two Native American trails:  the Sandtown, which led east from the Chattahoochee River at Utoy Creek, and the Shallowford, which follows today's Clairmont Road, and eventually crossed near Roswell. It was named for United States Navy Commodore Stephen Decatur.

During the American Civil War, Decatur became a strategic site in Sherman's Atlanta Campaign. In July 1864, Major-General James McPherson occupied the town to cut off the Confederates' supply line from Augusta. On July 22, during the Battle of Atlanta, Confederate cavalry under Major-General Joseph Wheeler attacked McPherson's supply wagons and the Union troops left to defend the wagons. A historical marker at the old courthouse marks the site of this skirmish.

 

 

Business Results 1 - 10 of 18

Martin Welding Company

4 Reviews

Metal Fabricators

Phone:

536 Edgewood Ave SE, Atlanta, GA 30312

Quality Welding Repair Services

2 Reviews

Metal Fabricators

Phone:

1588 Bogota Way, Jonesboro, GA 30236

Wilson Welding Service

1 Reviews

Metal Fabricators

Phone:

2899 Snapfinger Rd, Decatur, GA 30034

All Star Burglar Bars & Welding

1 Reviews

Metal Fabricators

Phone:

Atlanta, GA 30331

CJ Welding and Fabricating

1 Reviews

Metal Fabricators

Phone:

1684 Atlanta Rd SE, Smyrna, GA 30080

UBI Welders

2 Reviews

Metal Fabricators

Phone:

1660 Huntingdon Tr, Atlanta, GA 30350

Silvasons Machine Shop

4 Reviews

Metal Fabricators, Machine Shops

Phone:

840 Great Sw Pkwy SW, Atlanta, GA 30336

Duff It Welding

1 Reviews

Metal Fabricators

Phone:

Woodstock, GA 30188

Rick's Mobile Welding

1 Reviews

Metal Fabricators

Phone:

157 Peoples Rd, Jackson, GA 30233

Metal Head Welding and Fabrication

2 Reviews

Metal Fabricators

Phone:

3686 Meadowview Dr, Atlanta, GA 30122

 

The post Free Info on Evening Welding Training Near Me Decatur GA appeared first on How to Become a Welder.