Selecting the right welding trade school near Akron OH is an important first step to starting your new career as a professional welder. But since there are a lot of schools to pick from, how do you know which ones to consider? And more significantly, once you have narrowed down your options, how do you pick the best one? A number of prospective students begin by looking at the schools that are closest to their homes. Once they have found those that are within commuting distance, they are drawn toward the least expensive one. Yes, location and the cost of tuition are important considerations when reviewing welder technical schools, but they are not the only ones. Other factors include such things as accreditation, reputation and job placement rates. So before beginning your search for a vocational school to become a welder, it’s sensible to develop a list of qualifications that your chosen school must have. But before we delve into our due diligence checklist, let’s cover a little bit about how to become a welder.

Request Free Information on Welding Schools Near You

[campusexplorer header_text=”Find Welding Schools Near You!” aos=”53237562″ concentration=”025A8616″ tracking=”WELDER-5″]

Welding Degree and Certificate Training Classes

There are multiple options available to get training as a welder in a trade or vocational school. You can receive a a certificate, a diploma or an Associate Degree. Bachelor Degrees are offered in Welding Technology or Welding Engineering, but are more advanced degrees than most journeyman welders will need. Some programs are also made available combined with an apprenticeship program. Below are short explanations of the most common welding programs available in the Akron OH area.

• Certificate and Diploma Programs are normally offered by trade and technical schools and take about a year to complete. They are more hands-on training in nature, fashioned primarily to develop welding skills. They can provide a good foundation for a new journeyman or apprentice welder, or additional skills for working welders.
• Associate Degree Programs will take two years to complete and are usually offered by community colleges. An Associate Degree in Welding Technology provides a more well-rounded education than the diploma or certificate while still providing the foundation that prepares students to enter the workforce.

Some municipalities and states do have licensing requirements for welders, so don’t forget to check for your location of potential employment. If needed, the welding school you choose should prepare you for any licensing exams that you will have to pass in addition to furnishing the proper training to become a professional welder.

[campusexplorer header_text=”Find Welding Schools Near You!” aos=”53237562″ concentration=”025A8616″ is_lightbox=”1″ lightbox_btn_text=”Click Here to Get Free Information on Welding Schools Near You!” tracking=”WELDER-5LB”]

Welding Certification Choices

There are several institutions that offer welder certifications, which test the skill level and knowledge of those applying. A large number of Akron OH employers not only demand a degree or certificate from an accredited welding school, but also certification from a highly regarded organization like the American Welding Society (AWS). A variety of certifications are offered based on the kind of work that the welder performs. A few of the skills that certification can acknowledge are the welder’s ability to

• Operate in compliance with specific codes
• Work with specific metal thicknesses
• Work with specific types of welds
• Operate according to contract specifications

As formerly mentioned, some states, cities or local municipalities have licensing mandates for welders. Of those calling for licensing, some also require certification for various types of work. Certification is also a way to demonstrate to employers that you are an exceptionally skilled and qualified welder. So similarly as with licensing, look into the requirements for your local area and make sure that the welding technical school you decide on preps you for certification as needed.

Points to Ask Welder Tech Schools

When you have chosen the credential you would like to attain, a certificate, diploma or degree, you can start to assess schools. As you can imagine, there are numerous welding trade and technical schools in the Akron OH area. That’s why it’s essential to decide up front what qualifications your chosen school must have. We have previously discussed two important ones that most people look at first, which are location and tuition cost. As mentioned, although they are very important qualifications, they are not the only ones that need to be considered. After all, the school you pick is going to furnish the instruction that will be the foundation of your new vocation as a welder. So following are some additional factors you might want to evaluate before choosing a welding tech school.

Accreditation. It’s very important that the welder tech school you pick is accredited by either a national or a regional organization. There are two basic types of accreditation. The school may attain Institutional Accreditation based on all of their programs. Programmatic Accreditation is based on a single program the school has, such as Welding Technology. So verify that the program you select is accredited, not just the school alone. Also, the accreditation should be by a U.S. Department of Education recognized accrediting organization, for example the Accrediting Commission of Career Schools and Colleges of Technology (ACCSCT). Besides helping make sure that you get an excellent education, the accreditation may also assist in securing financial aid or student loans, which are frequently unavailable in Akron OH for non-accredited schools. Also, for those states or local governments that require licensing, they may require that the welder training program be accredited as well.

Job Placement and Apprenticeship Programs. Many welding degree or diploma programs are offered in conjunction with an apprenticeship program. Some other schools will help place you in an apprenticeship or a job after graduation. Ask if the schools you are considering assist in placing students in apprenticeships or have a job assistance program. The schools must have associations with local unions and other metal working businesses to which they can refer their students. Older schools may have a more substantial network of graduates that they can rely upon for placements. These programs can assist students in finding employment and establish associations within the Akron OH welding community.

Job Placement and Completion Rates. The completion rate is the portion or percentage of students that start an academic program and finish it. It’s crucial that the welding program you select has a higher completion rate. A low rate might indicate that the students who were in the program were dissatisfied with the instruction, the instructors, or the facilities, and dropped out. The job placement rate is also an indication of the quality of training. A higher job placement rate will not only confirm that the program has a good reputation within the industry, but also that it has the network of Akron OH contacts to help students secure apprenticeships or employment after graduation.

Up-to-date Equipment and Facilities. After you have decreased your selection of welding schools to two or three possibilities, you should consider going to the campuses to evaluate their facilities. Verify that both the equipment and the facilities that you will be trained on are up-to-date. Specifically, the training equipment should be comparable to what you will be working with on the job. If you are not sure what to look for, and are already in an apprenticeship program, ask the master welder you are working under for guidance. If not, ask a local Akron OH welding professional if they can give you some pointers.

School Location. Although we already briefly covered the significance of location, there are a few additional points that we need to address. You should keep in mind that unless you are able to move, the welder program you choose must be within driving distance of your Akron OH home. If you do opt to enroll in an out-of-state school, besides relocation expenses there may be higher tuition fees for out-of-state residents. This is particularly the case for welder certificate programs offered by community colleges. Also, if the school provides a job placement or apprenticeship program, most likely their placements are within the school’s local community. So the location of the school should be in a region or state where you subsequently will want to work.

Small Classes. Personalized training is important for a manual trade such as welding. It’s possible to get overlooked in larger classes and not get much personalized training. Find out what the average class size is for the welder programs you are considering. Ask if you can attend some classes so that you can experience how much individual attention the students are getting. While there, talk with some of the students and get their evaluations. Also, talk with a few of the teachers and ask what their welding experience has been and what certifications and credentials they hold.

Flexible Class Scheduling. Lots of folks learn a new profession while still employed at their present job. Confirm that the class schedules for the programs you are considering are flexible enough to fulfill your needs. If you can only go to classes at night or on weekends near Akron OH, verify that the schools you are looking at offer those options. If you can only attend part-time, make certain that the school you select offers part-time enrollment. Also, ask what the protocol is to make up classes if you you miss any due to work, sickness or family emergencies.

Online Welding Schools

Welding is very much a manual type of profession, and consequently not very suitable for training online. Even so, there are some online welding courses offered by various community colleges and vocational schools in the greater Akron OH area that may count toward a certificate or degree program. These courses primarily cover such topics as safety, reading blueprints, and metallurgy. They can help give a beginner a basis to start their education and training. However, the most critical point is that you can’t learn how to weld or handle welding materials until you actually do it. Clearly that can’t be performed online. These skills must be learned in an on-campus setting or in an apprenticeship. Online or distance learning is more appropriate for seasoned welders that would like to advance their knowledge or possibly attain a more advanced degree. So if you should discover an online welding certificate or degree program, be very cautious and confirm that the majority of the training is done on campus or in a workshop type of setting.

Where to Find Fast Track Welding Colleges Akron OH

Choosing the best welding school will probably be the most important decision you will make to start your new career. You originally stopped by our website because you had an interest in Where to Find Fast Track Welding Colleges and wanted more information on the topic Where to Find Evening Welding Colleges. However, as we have discussed in this article, there are a number of factors that you will need to assess and compare among the schools you are considering. It’s a prerequisite that any welding training that you are assessing includes a lot of hands-on instruction. Classes need to be small in size and each student must have their personal welding machine to train on. Classroom education should provide a real-world context, and the training program should be current and conform with industry standards. Programs differ in length and the kind of credential provided, so you will have to ascertain what length of program and degree or certificate will best serve your needs. Each program offers unique possibilities for certification as well. Perhaps The ideal means to research your short list of schools is to visit each campus and talk with the students and instructors. Invest some time to sit in on a few classes. Tour the campus and facilities. Make certain that you are confident that the training program you select is the right one for you. With the proper training, effort and commitment, the final result will be a new trade as a professional welder in Akron OH.

Other Ohio Welder Locations

Akron, Ohio

Akron (/ˈækrən/) is the fifth-largest city in the U.S. state of Ohio and is the county seat of Summit County. It is located on the western edge of the Glaciated Allegheny Plateau, about 30 miles (48 km) south of Cleveland. As of the 2017 Census estimate, the city proper had a total population of 197,846, making it the 119th-largest city in the United States. The Greater Akron area, covering Summit and Portage counties, had an estimated population of 703,505.[2]

The city was founded in 1825 by Simon Perkins and Paul Williams, along the Little Cuyahoga River at the summit of the developing Ohio and Erie Canal. The name is derived from the Greek word signifying a summit or high point. It was briefly renamed South Akron after Eliakim Crosby founded nearby North Akron in 1833, until both merged into an incorporated village in 1836. In the 1910s, Akron doubled in population, making it the nation's fastest-growing city.

A long history of rubber and tire manufacturing, carried on today by Goodyear Tire, gave Akron the nickname "Rubber Capital of the World". It was once known as a center of airship development.[5][6] Today, its economy includes manufacturing, education, healthcare, and biomedical research; leading corporations include Gojo Industries, FirstEnergy, Huntington Bank, and Charter Spectrum.

 

 

Business Results 1 - 10 of 3

Deans Welding & Fabrication

1 Reviews

Metal Fabricators

Phone:

4095 Lake Rockwell Rd, Ravenna, OH 44266

Metals

1 Reviews

Metal Fabricators

Phone:

185 Oak Leaf Oval, Bedford, OH 44146

ASAP Door

4 Reviews

Garage Door Services

Phone:

1669 W 130th St, Ste 209, Hinckley, OH 44233

 

The post Where to Find Fast Track Welding Colleges Akron OH appeared first on How to Become a Welder.